Effect of Silicon Carbide and Pine Apple Leaf Fibre on Wear Rate of Graphite Reinforced Polymer Matrix Composites

被引：0

作者：

Reddy M. ^{[1
]}

Adaveesh B. ^{[1
]}

Nagaral M. ^{[2
]}

机构：

[1] Dept. of Industrial Engg. and Management, Siddaganga Institute of Tech, Karnataka, Tumakuru

[2] Aircraft Research and Design Centre, Hindustan Aeronautics Limited, Karnataka, Bangalore

来源：

International Journal of Vehicle Structures and Systems | 2022年 / 14卷 / 04期

关键词：

Epoxy; Graphite powder; Hand lay-up; Pine apple leaf fibre; Silicon carbide; Wear resistance;

D O I：

10.4273/ijvss.14.4.13

中图分类号：

学科分类号：

摘要：

Polymer Matrix Composites (PMCs) are composed of a variety of continuous or short fibres with organic based polymer matrices. In PMCs, the reinforcement gives stiffness and high strength. The role of matrix material is to tie the fibres together and to transfer load between them. In this research epoxy (LY 556), with hardener (HY 0951) are reinforced with the Pine Apple Leaf Fibre (PALF), graphite powder and Silicon Carbide (SiC) using traditional hand lay-up technique. The attempt is made to evaluate the influence of SiC and PALF on the tribological behaviour. Results show that SiC particulate hybrid composites show higher wear resistance compared to all tested composites. PALF and graphite reinforcement provides a cushioning effect and solid lubrication to the composites that lead to higher wear resistance. © 2022. MechAero Foundation for Technical Research & Education Excellence.

引用

页码：481 / 484

页数：3

共 50 条

[31] Fabrication and Microstructure of Micro and Nano Silicon Carbide Reinforced Copper Metal Matrix Composites/Nanocomposites
Mahato, Amar
Mondal, Subrata
SILICON, 2021, 13 (04) : 1097 - 1105
[32] Evaluation of Mechanical Properties of Glass Fiber Reinforced Epoxy Polymer Composites with Alumina, Titanium dioxide and Silicon Carbide Fillers
Kiran, M. D.
Govindaraju, H. K.
Jayaraju, T.
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (10) : 22355 - 22361
[33] Effect of tungsten carbide, silicon carbide and graphite particulates on the mechanical and microstructural characteristics of AA 5052 hybrid composites
Dhas, D. S. Ebenezer Jacob
Velmurugan, C.
Wins, K. Leo Dev
BoopathiRaja, K. P.
CERAMICS INTERNATIONAL, 2019, 45 (01) : 614 - 621
[34] Development of sustainable abrasive wear resistant waste rubber crumb reinforced polymer matrix composites
Mahesh, Vishwas
Mahesh, Vinyas
Tejaswini, J. N.
Deekshitha, J.
Gunashree, P.
Ramyashree, G.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2023, 237 (09) : 2141 - 2150
[35] Tribo-mechanical characterization of spark plasma sintered chopped carbon fibre reinforced silicon carbide composites
Agarwal, Shivam
Sarkar, Soumya
Das, Mitun
Dixit, Amit Rai
CERAMICS INTERNATIONAL, 2016, 42 (16) : 18283 - 18288
[36] Microstructure and properties of particle reinforced silicon carbide and silicon nitride ceramic matrix composites prepared by chemical vapor infiltration
Liu, Yongsheng
Cheng, Laifei
Zhang, Litong
Hua, Yunfeng
Yang, Wenbin
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 475 (1-2): : 217 - 223
[37] Production and characterization of hybrid aluminum matrix composites reinforced with boron carbide (B4C) and graphite
Thirumalai, T.
Subramanian, R.
Kumaran, S.
Dharmalingam, S.
Ramakrishnan, S. S.
JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2014, 73 (10): : 667 - 670
[38] Friction surface evolution of carbon fibre reinforced carbon/silicon carbide (Cf/C-SiC) Composites
Wang, Yuan
Wu, Houzheng
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2010, 30 (15) : 3187 - 3201
[39] Interfacial bonding and friction in silicon carbide (filament)-reinforced ceramic- and glass-matrix composites
Bright, J.D., 1891, Pharmacotherapy Publications Inc. (72):
[40] Investigation of the Mechanical Behaviour of Nylon 6-Silicon Carbide (SiC) - Mica Polymer Matrix Composites
Anand, Thangavel
POLYMER-KOREA, 2023, 47 (06) : 703 - 710

← 1 2 3 4 5 →