High-sensitivity phase imaging eddy current magneto-optical system for carbon fiber reinforced polymers detection

被引：0

作者：

Ai J.-S. ^{[1
]}

Zhou Q. ^{[1
]}

Liang Y.-P. ^{[1
]}

Feng C.-R. ^{[1
]}

Long B. ^{[1
]}

Bai L.-B. ^{[1
]}

Wang Y.-G. ^{[2
]}

Ren C. ^{[3
]}

机构：

[1] Department of School of Automation Engineering, University of Electronic Science and Technology of China, Chengdu

[2] Department of Mechanical Engineering, Catholic University of Leuven, Leuven

[3] Chengdu Aircraft Industry Company Ltd., Chengdu

来源：

Journal of Electronic Science and Technology | 2023年 / 21卷 / 04期

基金：

中国国家自然科学基金;

关键词：

Carbon fiber reinforced polymers; Defect detection; Eddy current magneto-optical; Nondestructive testing; Phase imaging;

D O I：

10.1016/j.jnlest.2023.100225

中图分类号：

学科分类号：

摘要：

This paper proposed a high-sensitivity phase imaging eddy current magneto-optical (PI-ECMO) system for carbon fiber reinforced polymer (CFRP) defect detection. In contrast to other eddy current-based detection systems, the proposed system employs a fixed position excitation coil while enabling the detection point to move within the detection region. This configuration effectively mitigates the interference caused by the lift-off effect, which is commonly observed in systems with moving excitation coils. Correspondingly, the relationship between the defect characteristics (orientation and position) and the surface vertical magnetic field distribution (amplitude and phase) is studied in detail by theoretical analysis and numerical simulations. Experiments conducted on woven CFRP plates demonstrate that the designed PI-ECMO system is capable of effectively detecting both surface and internal cracks, as well as impact defects. The excitation current is significantly reduced compared with traditional eddy current magneto-optical (ECMO) systems. © 2023 The Authors

引用

共 22 条

[1]

Kupski J., de Freitas S.-T., Design of adhesively bonded lap joints with laminated CFRP adherends: review, challenges and new opportunities for aerospace structures, Compos. Struct., 268, pp. 1-13, (2021)

[2]

Seguin-Charbonneau L., Walter J., Theroux L.-D., Scheed L., Beausoleil A., Masson B., Automated defect detection for ultrasonic inspection of CFRP aircraft components, NDT&E Int., 122, pp. 1-9, (2021)

[3]

Shoukroun D., Massimi L., Endrizzi M., Bate D., Fromme P., Olivo A., Edge illumination X-ray phase contrast imaging for impact damage detection in CFRP, Mater. Today Commun., 31, (2022)

[4]

Wu D.-H., Chen W.-X., Yang J.-X., Yang F., Self-resonance eddy-current testing method in noncontact detection of carbon fiber reinforced plastics, Compos. Struct., 259, pp. 1-9, (2021)

[5]

Zhu P.-P., Bai L.-B., Cheng Y.-H., Feature extraction approach for defect inspection in eddy current pulsed thermography, Journal of Electronic Science and Technology, 19, 4, pp. 390-400, (2021)

[6]

Garcia-Martin J., Gomez-Gil J., Vazquez-Sanchez E., Non-destructive techniques based on eddy current testing, Sensors-Basel, 11, 3, pp. 2525-2565, (2011)

[7]

Wu D.-H., Cheng F., Yang F., Huang C., Non-destructive testing for carbon-fiber-reinforced plastic (CFRP) using a novel eddy current probe, Composer Part B-Eng., 177, pp. 1-9, (2019)

[8]

Hatsukade Y., Shinyama Y., Yoshida K., Et al., Nondestructive evaluation of ±45° flat-braided carbon-fiber-reinforced polymers with carbon nanofibers using HTS-SQUID gradiometer, Physica C, 484, pp. 195-201, (2013)

[9]

Heuer H., Schulze M.-H., Meyendorf N., Non-destructive evaluation (NDE) of composites: eddy current techniques, Non-Destructive Evaluation (NDE) of Polymer Matrix Composites, pp. 33-55, (2013)

[10]

Ruosi A., Nondestructive detection of damage in carbon fibre composites by SQUID magnetometry, Phys. Status Solidi C, 2, 5, pp. 1533-1555, (2005)

← 1 2 3 →