Pesticide removal from drinking water sources by adsorption: a review

被引:91
作者
Cosgrove S. [1 ]
Jefferson B. [1 ]
Jarvis P. [1 ]
机构
[1] Cranfield Water Science Institute, Cranfield University, Bedford
基金
英国自然环境研究理事会;
关键词
adsorption; catchment management; constructed wetlands; drinking water quality; Pesticides;
D O I
10.1080/21622515.2019.1593514
中图分类号
学科分类号
摘要
Pesticides are an important part of crop production worldwide, however their use poses a threat to potable water sources. Seasonal use of pesticides can cause increased concentrations to be detected at potable water abstraction sites as a shock load which can be difficult for conventional treatment processes to deal with. Concentrations of pesticides above 0.1 µg/L in drinking water contravene the regulations as laid out in the Drinking Water Directive and cause significant reputational and financial impact to water companies. This review considers the relationships between the pesticides that have caused compliance failures and their physico-chemical properties, and factors such as weather and rainfall. It was found that over 50% of the pesticide compliance failures in England and Wales were caused by the molluscicide metaldehyde and that the majority of the problematic pesticides are considered to be polar and mobile. The review looks in further detail at five different pesticides with differing physico-chemical properties known to have caused compliance failures and to be of particular concern for water companies. In addition adsorption media which could be utilised in agricultural catchments were investigated to understand whether they could be applied to prevent the onward contamination of potable water sources. © 2019, © 2019 Informa UK Limited, trading as Taylor & Francis Group.
引用
收藏
页码:1 / 24
页数:23
相关论文
共 159 条
[61]  
Strawn D.G., Bohn H.L., O'Connor G.A., Soil chemistry, (2015)
[62]  
Product properties test guidelines: OPPTS 830.7370 dissociation constants in water, (1996)
[63]  
De Smedt C., Spanoghe P., Biswas S., Et al., Comparison of different solid adsorbents for the removal of mobile pesticides from aqueous solutions, Adsorption, 21, 3, pp. 243-254, (2015)
[64]  
Tomlin C.D.S., The pesticide manual, (2009)
[65]  
Gu B., Meldrum B., McCabe T., Et al., Enhancing concentration and mass sensitivities for liquid chromatography trace analysis of clopyralid in drinking water, J Sep Sci, 35, 2, pp. 185-192, (2011)
[66]  
Momcilovic M., Randjelovic M., Onjia A., Et al., Study on efficient removal of clopyralid from water using resorcinol-formaldehyde carbon cryogel, J Serbian Chem Soc, 79, 4, pp. 481-494, (2014)
[67]  
Celis R., Adelino M.A., Hermosin M.C., Et al., Montmorillonite-chitosan bionanocomposites as adsorbents of the herbicide clopyralid in aqueous solution and soil/water suspensions, J Hazard Mater, 209-210, pp. 67-76, (2012)
[68]  
(2015)
[69]  
Initial risk assessment provided by the rapporteur Member State Finland for the existing active substance Clopyralid, (2005)
[70]  
Sojic D.V., Anderluh V.B., Orcic D.Z., Et al., Photodegradation of clopyralid in TiO2 suspensions: identification of intermediates and reaction pathways, J Hazard Mater, 168, pp. 94-101, (2009)