Effect of nano-TiO2 size and utilization ratio on the performance of photocatalytic concretes; self-cleaning, fresh, and hardened state properties

被引：1
作者：
Şahin H.G. [1 ]
Temel M. [1 ]
Koçak G. [2 ]
Mardani A. [1 ]
Kara A. [2 ]
机构：
[1] Department of Civil Engineering, Bursa Uludag University, Bursa
[2] Department of Chemistry, Bursa Uludag University, Bursa
来源：
Environ. Sci. Pollut. Res. | / 25卷 / 37109-37124期
关键词：
Bohme abrasion resistance; Compressive-flexural strength; Dye removal; Nano-TiO[!sub]2[!/sub; Photocatalyst; Reactive Black 5;
D O I：
10.1007/s11356-024-33660-9
中图分类号：
学科分类号：
摘要：
In this study, photocatalysis technology was used to reduce water pollution. Decolorization of Reactive Black 5 using nano-TiO2 (NT) as a photocatalyst was investigated by adsorption and degradation experiments. Effects of NT particle size and utilization ratio on the time-dependent flow performance, compressive-flexural strength, and Bohme abrasion resistance of cementitious systems were investigated. In addition to the NT-free control mixture, a total of six photocatalytic self-cleaning mortar mixtures (PSCM) were prepared using NT in two different particle sizes (28 and 38 nm) and three different ratios (0.5%, 1%, and 1.5%). The PSCM sample containing 38 nm NT exhibited superior performance in terms of photocatalytic properties compared to the 28 nm state. It was observed that the flow performance of PSCM mixtures with NT substitution is adversely affected regardless of the NT type. Mixtures containing NT with a lower particle size (28 nm) had higher compressive and flexural strengths. © The Author(s) 2024.
引用
收藏
页码：37109 / 37124
页数：15
相关论文
共 108 条
  • [1] Asad S., Amoozegar M.A., Pourbabaee A.A., Sarbolouki M.N., Dastgheib S.M.M., Decolorization of textile azo dyes by newly isolated halophilic and halotolerant bacteria, Biores Technol, 98, 11, pp. 2082-2088, (2007)
  • [2] Barredo-Damas S., Alcaina-Miranda M.I., Bes-Pia A., Iborra-Clar M.I., Iborra-Clar A., Mendoza-Roca J.A., Ceramic membrane behavior in textile wastewater ultrafiltration, Desalination, 250, 2, pp. 623-628, (2010)
  • [3] Beeldens A., Air purification by pavement blocks: Final results of the research at the BRRC, Air Purification by Pavement Blocks: Final Results of the Research at the BRRC, (2008)
  • [4] Benkhaya S., Harfi S.E., Harfi A.E., Classifications, properties and applications of textile dyes: a review, Appl J Environ Eng Sci, 3, 3, pp. 311-320, (2017)
  • [5] Berradi M., Hsissou R., Khudhair M., Assouag M., Cherkaoui O., el Bachiri A., el Harfi A., Textile finishing dyes and their impact on aquatic environs, Heliyon, 5, 11, (2019)
  • [6] Bizani E., Fytianos K., Poulios I., Tsiridis V., Photocatalytic decolorization and degradation of dye solutions and wastewaters in the presence of titanium dioxide, J Hazard Mater, 136, 1, pp. 85-94, (2006)
  • [7] Castro-Hoyos A.M., Rojas Manzano M.A., Maury-Ramirez A., Challenges and opportunities of using titanium dioxide photocatalysis on cement-based materials, Coatings, 12, 7, (2022)
  • [8] Cebeci M.S., Selcuk S.F., Dye removal and mineralization from wastewater by photocatalytic method [In Turkish], Acad Platform J Eng Sci, 8, 3, pp. 533-539, (2020)
  • [9] Chen J., Kou S.C., Poon C.S., Hydration and properties of nano-TiO2 blended cement composites, Cement Concr Compos, 34, 5, pp. 642-649, (2012)
  • [10] Daniyal M., Akhtar S., Azam A., Effect of nano-TiO2 on the properties of cementitious composites under different exposure environments, J Market Res, 8, 6, pp. 6158-6172, (2019)
12345678910