Research on Influence Factors of Cold Roll-beating Forming Forces of Leadscrews

被引：0

作者：

Li Y. ^{[1
,2
]}

Cui L. ^{[1
]}

Miao Z. ^{[1
]}

机构：

[1] Faculty of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an

[2] Xi'an Modern Control Technology Research Institute, Xi'an

来源：

Zhongguo Jixie Gongcheng/China Mechanical Engineering | 2020年 / 31卷 / 09期

关键词：

Cold roll-beating; Forming force; Leadscrew; Rolling wheel; Simulation;

D O I：

10.3969/j.issn.1004-132X.2020.09.008

中图分类号：

学科分类号：

摘要：

A finite element simulation model was established on the basis of the cold roll-beating forming principles of the leadscrew to study the relationship among the radius of the rolling wheel, the fillet radius of the rolling wheel, the amount of beating, and the deformation forces. The single and multiple rolling forming processes were obtained through simulation and obtaining of the deformation force varying laws with the radius of the rolling wheel, the fillet radius of the rolling wheel and the amount of beating. Through the orthogonal test, the influence laws of the amount of beating, the rotational speed of the rolling shaft, the thickness of the rolling wheel and the rotational speed of the workpiece on deformation forces were studied. The change trend of the measured forming forces was basically consistent with the simulation results, and the correctness of the finite element simulation model was verified by the experiments which were carried out on the self-designed cold roll-beating forming leadscrew equipment. © 2020, China Mechanical Engineering Magazine Office. All right reserved.

引用

页码：1065 / 1073

页数：8

共 13 条

[11]

CUI Fengkui, LI Yan, LI Chunmei, The Development of Involute Spline Machining Method, Mining & Processing Equipment, 35, 2, pp. 116-119, (2007)

[12]

ZHANG Lu, LI Yan, YANG Mingshun, Et al., Finite Element Numerical Simulation for High Speed Cold Roll Beating Forming Process, Materials for Mechanical Engineering, 36, 8, pp. 86-88, (2012)

[13]

LI Yuxi, LI Yan, YANG Mingshun, Et al., Simulation Analysis for High Speed Cold Roll Beating Forming Process of 40Cr Steel, Mechanical Science and Technology for Aerospace Engineering, 35, 4, pp. 594-600, (2016)

← 1 2 →