Investigation of reciprocating friction characteristics between different bionic surfaces of prosthesis materials and skin

被引:9
作者
Feng Q. [1 ]
Li W. [1 ]
Liu X. [2 ]
Ji W. [1 ]
Zhou Z. [1 ]
机构
[1] Tribology Research Institution, Key Laboratory for Advanced Technology of Materials of Ministry of Education, Southwest Jiaotong University, Cheng Du
[2] Sichuan Bayi Rehabilitation Center (Sichuan Rehabilitation Hospital), Chengdu
来源
Biosurface and Biotribology | 2019年 / 5卷 / 02期
基金
中国国家自然科学基金;
关键词
D O I
10.1049/bsbt.2019.0003
中图分类号
学科分类号
摘要
In this study, three types of bionic texture surfaces were designed, based on the microstructure of tree frog and gecko feet, for two typical prosthetic substrates: silicone rubber and thermoplastic polyurethane elastomer (TPU). The surface energy of all bionic texture surfaces, and the relative displacement and energy dissipation of the reciprocating friction between these bionic surfaces and skin, were investigated. The results revealed that the bionic texture of the prosthetic socket surface had an obvious influence on the surface characteristics and reciprocating characteristics of friction with the skin. According to the comprehensive weight rating method, the optimal bionic textures for the silicone rubber substrate were a regular hexagonal prism and a quadrangular prism; for the TPU substrate, only the regular quadrangular prism texture was optimal. These textures can effectively increase the surface energy of the surface of the prosthetic socket, thereby increasing its adhesion to skin and reducing the dissipation of friction energy when it interacts with the stump. This bionic prosthetic socket surface design helps improve the adaptation between the prosthetic socket and the stump. © 2019 Institution of Engineering and Technology. All rights reserved.
引用
收藏
页码:57 / 66
页数:9
相关论文
共 29 条
[1]  
Lyon C.C., Kulkarni J., Zimerson E., Et al., Skin disorders in amputees, J. Am. Acad. Dermatol., 42, pp. 501-507, (2000)
[2]  
Zhang M., Turner-Smith A.R., Roberts V.C., The reaction of skin and soft tissues to shear forces applied externally to the skin surface, J. Eng. Med., 208, pp. 217-222, (1994)
[3]  
Zhu M.H., Cai Z.B., Li W., Et al., Fretting in prosthetic devices related to human body, Tribol. Int., 42, 9, pp. 1360-1364, (2009)
[4]  
Li W., Liu X.D., Cai Z.B., Et al., Effect of prosthetic socks on the frictional properties of residual limb skin, Wear, 271, 11-12, pp. 2804-2811, (2011)
[5]  
Li W., Qu S.X., Zheng Y.J., Et al., Skin self-adaptation to friction trauma under reciprocal sliding conditions, Tribol. Int., 44, 12, pp. 1782-1789, (2011)
[6]  
Zachariah S.G., Sanders J.E., Finite element estimates of interface stress in the trans-tibial prosthesis using gap elements are different from those using automated contact, J. Biomech., 33, 7, pp. 895-899, (2000)
[7]  
Zhang M., Roberts C., Comparison of computational analysis with clinical measurement of stresses on below-knee residual limb in a prosthetic socket, Med. Eng. Phys., 22, 9, pp. 607-612, (2000)
[8]  
Shi L., Xie X.H., Xu P., Et al., Skin traumas under reciprocating friction conditions, Tribology, 35, 1, pp. 66-73, (2015)
[9]  
Li W., Pang Q., Lu M., Et al., Rehabilitation and adaptation of lower limb skin to friction trauma during friction contact, Wear, 332-333, pp. 725-733, (2015)
[10]  
Derler S., Gerhardt L.C., Tribology of skin: Review and analysis of experimental results for the friction coefficient of human skin, Tribol. Lett., 45, 1, pp. 1-27, (2012)