Rolling bearing fault diagnosis based on CEEMDAN-VSSLMS

被引：0

作者：

Jiang L. ^{[1
]}

Xiang S. ^{[1
]}

机构：

[1] College of Information and Control Engineering, Xi’an University of Architecture and Technology, Xi’an

来源：

Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS | 2024年 / 30卷 / 03期

基金：

中国国家自然科学基金;

关键词：

bearing fault diagnosis; discrete wavelet transform; empirical mode decomposition; GoogLeNet model; least mean square algorithm;

D O I：

10.13196/j.cims.2023.IM09

中图分类号：

学科分类号：

摘要：

Aiming at the problems that the traditional mechanical bearing fault diagnosis model is easy to be disturbed by system noise and low efficiency of feature recognition, a bearing fault diagnosis method based on deep modeling a-nalysis of signal inherent mode was proposed. The collected bearing vibration signals were subjected to Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) to obtain local characteristic signals of different time scales. Correlation coefficients were used to identify and remove false intrinsic mode function. The remaining IMF components were denoised and reconstructed by Variable Step-Size Least Mean Square algorithm (VSSLMS). Then, the vibration signal after noise reduction was obtained by Discrete Wavelet Transform (DWT) , and the feature was enhanced by morphological operation. The improved GoogLeNet network model was used to train the feature map, and the feature classification was completed by Softmax classifier, so as to realize the bearing fault diagnosis. The proposed fault diagnosis method was applied to the bearing fault data set under different working conditions, and the test results showed that the diagnosis accuracy was higher under noise interference. © 2024 CIMS. All rights reserved.

引用

页码：1138 / 1148

页数：10

共 20 条

[1] CHU W, LIU T, WANG Z Y, Et al., Research on the sparse optimization method of periodic weights and its application in bearing fault diagnosis, Mechanism and Machine Theory, 177, (2022)
[2] ZHUANG D Y, LIU H R, ZHENG H, Et al., The IBA-ISMO method for rolling bearing fault diagnosis based on VMD-Sam- pie entropy, Sensors, 23, 2, (2023)
[3] GU H, LIU W Y, ZHANG Y, Et al., A novel fault diagnosis method of wind turbine bearings based on compressed sensing and AlexNet, Measurement Science and Technology, 33, 11, (2022)
[4] MENG D B, WANG H T, YANG S Y, Et al., Fault analysis of wind power rolling bearing based on emd feature extraction [J], Computer Modeling in Engineering & Sciences, 130, 1, pp. 543-558, (2022)
[5] BANG J, DI MARCO P, SHIN H, Et al., Deep transfer learning-based fault diagnosis using wavelet transform for limited data, Applied Sciences, 12, 15, (2022)
[6] DONOHO D L., De-noising by soft-thresholding, IEEE transactions on information theory, 41, 3, pp. 613-627, (1995)
[7] GU J, PENG Y X, LU H, Et al., A novel fault diagnosis method of rotating machinery via VMD, CWT and improved CNN, Measurement, 200, (2022)
[8] LIU Jiarui, YANG Guotian, WANG Xiaowei, A wind turbine fault diagnosis method based on Siamese deep neural network, Journal of Systems Simulation, 34, 11, pp. 2348-2358, (2022)
[9] SHEN Tao, LI Shunming, CNN-LSTM method with batch normalization for rolling bearing fault diagnosis [J], Computer Integrated Manufacturing Systems, 28, 12, pp. 3946-3955, (2022)
[10] CHEN Qilei, JIANG Yiyue, TANG Yao, Et al., An induction motor fault diagnosis method based on the time-frequency image method and an improved graph convolutional network [J], Journal of Vibration and Shock, 41, 24, pp. 241-248, (2022)

← 1 2 →