Design and Experimental Analysis of A Stirring Device for A Pneumatic Precision Rice Seed Metering Device

被引:0
作者
Xing H. [1 ]
Zang Y. [1 ]
Wang M.Z. [1 ]
Luo W.X. [1 ]
Zhang H.M. [1 ]
Ma X.Y. [1 ]
Fang Y.L. [1 ]
机构
[1] Key Laboratory of Key Technology on Agricultural Machine and Equipment, South China Agricultural University, Ministry of Education, Guangzhou
来源
Transactions of the ASABE | 2020年 / 63卷 / 04期
基金
中国国家自然科学基金;
关键词
Agricultural machinery; Precision seeding; Rice sowing; Seed stirring device; Seeder;
D O I
10.13031/TRANS.13096
中图分类号
学科分类号
摘要
To achieve a goal of precision seeding with 1 to 3 seeds per hill and to solve problems in a pneumatic rice seed metering device, including high resistance to seed sucking, poor stability of seed suction, and low seeding precision, a cylindrical seed stirring device was designed. The design was based on the characteristics of the rice seed flow in the seed suction area. A mechanical model of the rice seed in the seed stirring device was established. The relationships between the seed fluidity and the parameters of the seed stirring device were simulated with EDEM software. The effects of seed fluidity on the seed suction area were analyzed under different seed stirring device parameters. To analyze the influences of different parameters of the seed stirring device on seed stirring and to observe the relationships between different parameters and rice seeds, high-speed photography was used to observe the seed sucking and stirring processes. The super hybrid rice Y-2 You 900 was selected as the test material. The seeding precision was tested at different rotating speeds, negative pressures, and parameters of the seed stirring device. The test results showed that an increase in the diameter and thickness of the seed stirring device was beneficial for increasing the seed absorption rate and reducing the missed seed rate but also increased the rate of multiple-seed sucking and reduced the seeding precision. The optimal parameters of the seed stirring device were a cylinder thickness of 2 mm and a diameter of 5 mm. This study provides a certain reference basis for the seed suction process of a pneumatic seed metering device. © 2020 American Society of Agricultural and Biological Engineers. All rights reserved.
引用
收藏
页码:799 / 808
页数:9
相关论文
共 50 条
[31]   Design and experiment of air-assisted high speed precision maize seed metering device [J].
Gao X. ;
Xu Y. ;
Zhang D. ;
Yang L. ;
Lu B. ;
Su Y. ;
Xia G. ;
Cui T. .
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2019, 35 (23) :9-20
[32]   Design of air suction high speed precision maize seed metering device with assistant seed filling plate [J].
Ding L. ;
Yang L. ;
Liu S. ;
Yan B. ;
He X. ;
Zhang D. .
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2018, 34 (22) :1-11
[33]   Theoretical analysis and experiments of metering performance of the pheumatic seed metering device [J].
Liu W. ;
Zhao M. ;
Wang W. ;
Zhao S. .
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2010, 26 (09) :133-138
[34]   Investigation on vacuum singulating effect influencing factors of pneumatic precision seed metering device for small particle size of seeds [J].
Liao Y. ;
Liao Q. ;
Wang L. ;
Zheng J. ;
Gao L. .
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2018, 34 (24) :10-17
[35]   Simulation and verification of seed-filling performance of pneumatic-combined holes maize precision seed-metering device based on EDEM [J].
Shi, Song ;
Zhang, Dongxing ;
Yang, Li ;
Cui, Tao ;
Li, Kehong ;
Yin, Xiaowei .
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2015, 31 (03) :62-69
[36]   Numerical simulation and experiment on seeding performance of slide hole-wheel precision seed-metering device for rice [J].
Zhu D. ;
Li L. ;
Wen S. ;
Zhang S. ;
Jiang R. ;
Wu L. .
Zhang, Shun (shunzhang@ahau.edu.cn), 2018, Chinese Society of Agricultural Engineering (34) :17-26
[37]   Design and experiment on variable reseeding system for rapeseed precision metering device [J].
Ding Y. ;
Yang J. ;
Zhang L. ;
Zhu K. .
2018, Chinese Society of Agricultural Engineering (34) :27-36
[38]   Optimal Structure Design and Performance Tests of Seed metering Device with Fluted Rollers for Precision Wheat Seeding Machine [J].
Jin Minfeng ;
Ding Yongqian ;
Yu Hongfeng ;
Liu Haitao ;
Jiang Yizhuo ;
Fu Xiuqing .
IFAC PAPERSONLINE, 2018, 51 (17) :509-514
[39]   Design and experiment of an air-suction potato seed metering device [J].
Lu Jinqing ;
Yang Ying ;
Li Zihui ;
Shang Qinqin ;
Li Jicheng ;
Liu Zhongyuan .
INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING, 2016, 9 (05) :33-42
[40]   Design of driving lever air suction type seed metering device [J].
Wang, Xiao ;
Lu, Xiao-rong ;
He, Lin ;
Wu, Teng-fei .
PROCEEDINGS OF THE 2017 3RD INTERNATIONAL FORUM ON ENERGY, ENVIRONMENT SCIENCE AND MATERIALS (IFEESM 2017), 2017, 120 :734-737