Effect of different temperatures on shape memory effect and protective performance of epoxy coating

被引：0

作者：

Zhong-Hai L. ^{[1
]}

Lun-Wu Z. ^{[2
]}

Chuan-Peng L. ^{[1
]}

Jin-Guang Y. ^{[1
]}

Jie L. ^{[1
]}

机构：

[1] School of Chemistry and Chemical Engineering, Yantai University, Yantai

[2] Weathering Test and Research Center of Science Technology and Industry for National Defense, Southwest Technology and Engineering Research Institute, Chongqing

来源：

Surface Technology | 2021年 / 50卷 / 01期

基金：

中国国家自然科学基金;

关键词：

EIS; Epoxy coating; Self-healing; Shape memory effect; Temperatures;

D O I：

10.16490/j.cnki.issn.1001-3660.2021.01.032

中图分类号：

学科分类号：

摘要：

The work aims to study the effect of different temperatures on the shape memory effect and protective performance of epoxy coating. Self-healing anticorrosive coating was prepared by mixing equimolar bisphenol A diglycidyl ether, neopentyl glycol diglycidyl ether and D230 curing agent. The chemical structure and mechanical properties of the epoxy coating were characterized by Fourier infrared transform spectroscopy (FTIR) and adhesion tester. The shape recovery rate of the epoxy coating at different temperatures was measured to characterize its shape memory performance. Electrochemical impedance spectroscopy (EIS) technique was used to characterize the electrochemical performance of the epoxy coating, and micro-morphological evolutions of scratched coating were recorded by an electronic digital microscope. The main characteristic peaks and relative intensity of the anti-corrosion coating with self-healing function at different temperatures in the infrared spectrum were basically the same as those of the unheated epoxy coating, and the adhesion strength of the epoxy coating at different temperatures all exceeded 13 MPa. As the heating temperatures increased, the recovery rate of the epoxy coating first increased rapidly and then increased slowly. Meanwhile, the impedance modulus first increased and then decreased, and the scratch width first decreased and then basically did not change. The impedance value of the epoxy coating after heating at 70 ℃ was always significantly higher than that of the unheated epoxy coating in the same immersion time. Within a certain temperature range, the self-healing anticorrosive coating has no degradation reaction, and it has excellent adhesion performance. Increasing temperature enhances the movement trend of molecular chains, and improves the self-healing performance of the epoxy coating. When the heating temperature is very high, the self-healing performance of the coating is not further enhanced. Therefore, the optimal response temperature for obtaining the shape memory effect of the epoxy coating is 70 ℃. Triggering the shape memory effect of the epoxy coating after it is heated to 70 ℃ can significantly narrow the width of the scratches and greatly improve the protective performance of the scratched coating. © 2021, Chongqing Wujiu Periodicals Press. All rights reserved.

引用

页码：357 / 365

页数：8

共 36 条

[1]

Liu J., Li X.B., Wang J., Et al., Studies of impedance models and water transport behaviours of epoxy coating at hydrostatic pressure of seawater[J], Progress in Organic Coatings, 76, 7-8, pp. 1075-1081, (2013)

[2]

Ling W., Zhong-Hai L., Jie L., Et al., Failure behavior of epoxy coatings in seawater at different mperatures[J], Equipment Environmental Engineering, 16, 4, pp. 113-118, (2019)

[3]

Xiao-Hui W., Shou-Biao L., Zhao L., Et al., Degradation processes of organic coating with artificial defects in flowing seawater[J], Equipment Environmental Engineering, 15, 11, pp. 102-108, (2018)

[4]

Meng-Qiu P., Lun-Tao W., Xuan D., Et al., The research progress of self-healing anti-corrosion coatings [J], Materials China, 37, 1, pp. 19-27, (2018)

[5]

Shuai L., Zhuo Z., Wei Y., Et al., Mechanism progress for thermally-stimulated shape memory behavior of polymer[J], Plastics, 47, 6, pp. 118-120, (2018)

[6]

Ming G., Dong H., Jie G., Et al., Preparation and characterization of shape memory epoxy resin with self-healing performance[J], Paint & Coatings Industry, 48, 11, pp. 5-9, (2018)

[7]

Jian-Bao Z., Research on Preparation and Properties of Polyaniline/Epoxy Shape Memory Composites[D], (2016)

[8]

Gonzalez-Garcia Y., Mol J., Muselle T., Et al., A combined mechanical, microscopic and local electrochemical evaluation of self-healing properties of shapememory polyurethane coatings[J], Electrochimica Acta, 56, 26, pp. 9619-9626, (2011)

[9]

Jorcin J.B., Scheltjens G., Ingelgem Y.V., Et al., Investigation of the self-healing properties of shape memory polyurethane coatings with the 'odd random phase multisine’ electrochemical impedance spectroscopy[J], Electrochimica Acta, 55, 21, pp. 6195-6203, (2010)

[10]

Lutz A., Otto V.D.B., Jonas V.D., Et al., A shaperecovery polymer coating for the corrosion protection of metallic surfaces[J], Acs Applied Materials & Interfaces, 7, 1, pp. 175-183, (2015)

← 1 2 3 4 →