Study on thermal fatigue stability in microstructure and mechanical property of Fe35Ni35Cr20Mn10 high-entropy alloy wire and pearlite wire at high/medium temperature environment

被引：2
作者：
Shi, Mengchuan [1 ]
Pan, Xinghui [1 ]
Wu, Dan [2 ]
Liao, Hengcheng [1 ]
Li, Guangjing [1 ]
Liu, Hongfang [2 ]
Zhu, Weijun [2 ]
机构：
[1] Southeast Univ, Sch Mat Sci & Engn, Jiangsu Key Lab Adv Met Mat, Nanjing 211189, Peoples R China
[2] Jiangsu Key Lab Core Technol High Performance Stee, Wuxi 214400, Peoples R China
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2024年 / 183卷
关键词：
High-entropy alloy wire; Pearlite wire; Microstructure; Mechanical properties; Thermal fatigue; COLD-DRAWN; PHASE-STABILITY; STEEL; CEMENTITE; DEFORMATION; BEHAVIOR; DIFFUSION; STRENGTH; CARBON; PRECIPITATION;
D O I：
10.1016/j.ijfatigue.2024.108274
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Thermal fatigue stability in microstructure and strength of Fe35Ni35Cr20Mn10 high-entropy alloy (HEA) wire and pearlite wire at 400-700 degrees C with low cycles was studied. The pearlite wire has a poor stability in microstructure and strength, significantly changing with the temperature. HEA wire has an excellent thermal fatigue stability. After the thermal fatigue at 400 degrees C and 500 degrees C, the microstructure and strength does not change at all. Only after the thermal fatigue at 600 degrees C and 700 degrees C, the microstructure and strength change considerably. Both the values of UTS and YS of the HEA wires after the thermal fatigue at 500 degrees C and 600 degrees C are higher than that of the pearlite wires, even both the values of HEA wire in as-drawn state are much lower than that of pearlite wire. Both the thermal fatigue and isothermal annealing at 500 degrees C and 600 degrees C resulted in an obvious tempering brittleness in pearlite wire.
引用
收藏
页数：11
相关论文
共 58 条
[1]   A crucial review on recent updates of oxidation behavior in high entropy alloys [J].
Anne, Bhargavi Rani ;
Shaik, Shajahan ;
Tanaka, Masaki ;
Basu, Anindya .
SN APPLIED SCIENCES, 2021, 3 (03)
[2]   The influence of the cube component on the mechanical behaviour of copper polycrystalline samples in tension [J].
Bacroix, B. ;
Queyreau, S. ;
Chaubet, D. ;
Siv, E. ;
Chauveau, Th .
ACTA MATERIALIA, 2018, 160 :121-136
[3]   Deep Drawing Behavior of CoCrFeMnNi High-Entropy Alloys [J].
Bae, Jae Wung ;
Moon, Jongun ;
Jang, Min Ji ;
Ahn, Dong-Hyun ;
Joo, Soo-Hyun ;
Jung, Jaimyun ;
Yim, Dami ;
Kim, Hyoung Seop .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (09) :4111-4120
[4]   Cold-drawn pearlitic steel wires [J].
Borchers, Christine ;
Kirchheim, Reiner .
PROGRESS IN MATERIALS SCIENCE, 2016, 82 :405-444
[5]   Microstructural development in equiatomic multicomponent alloys [J].
Cantor, B ;
Chang, ITH ;
Knight, P ;
Vincent, AJB .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 :213-218
[6]   Influence of reduction ratio on the microstructural evolution and subsequent mechanical properties of cold-drawn Co10Cr15Fe25Mn10Ni30V10 high entropy alloy wires [J].
Cho, Han Sol ;
Bae, Seong Jun ;
Na, Young Sang ;
Lee, Kwang Seok ;
Kim, Jeoung Han ;
Lee, Dong Geun .
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 821
[7]  
Chun L, 2018, Hot working technology, V47, P11
[8]   Phase composition of AlxFeNiCrCo high entropy alloys prepared by sintering and arc-melting methods [J].
Cieslak, J. ;
Tobola, J. ;
Berent, K. ;
Marciszko, M. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 740 :264-272
[9]   DISLOCATION THEORY OF YIELDING AND STRAIN AGEING OF IRON [J].
COTTRELL, AH ;
BILBY, BA .
PROCEEDINGS OF THE PHYSICAL SOCIETY OF LONDON SECTION A, 1949, 62 (349) :49-62
[10]   Finite element simulation of fretting wear and fatigue in thin steel wires [J].
Cruzado, A. ;
Leen, S. B. ;
Urchegui, M. A. ;
Gomez, X. .
INTERNATIONAL JOURNAL OF FATIGUE, 2013, 55 :7-21
123456