Effect of heat treatment on young’s modulus and poisson’s ratio of thermal barrier coating studied by bending of three-layered specimen

被引：1
作者：
Hayase T. [1 ]
Waki H. [2 ]
Adachi K. [2 ]
机构：
[1] Graduate School of Engineering, Iwate University, Ueda, Morioka
[2] Department of Systems Innovation Engineering, Iwate University, Ueda, Morioka
来源：
Zairyo/Journal of the Society of Materials Science, Japan | 2020年 / 69卷 / 08期
基金：
日本学术振兴会;
关键词：
Elastic modulus; Four-point bending; MCrAlY; Sintering; Thermal barrier coating; Yttria-stabilized zirconia;
D O I：
10.2472/jsms.69.618
中图分类号：
学科分类号：
摘要：
Thermal barrier coating (TBC) is a key technology for prolonging the life of the hot sections of gas turbine and airplane engines. A TBC system has a three-layered structure comprising a substrate, bond coat (BC), and TBC topcoat (TC). Young’s moduli and Poisson’s ratios of the coatings are important for calculating the parameters of material mechanics in the TBC system. However, research on Poisson’s ratio is scarce owing to the difficulty of its evaluation. The objective of this paper is to investigate the effect of high temperature exposure on Poisson’s ratios of yttria-stabilized zirconia TC and CoNiCrAlY BC. For this purpose, we evaluated the time-dependent Young’s moduli and Poisson’s ratios of coatings thermally treated at 600 °C to 1000 °C using the bending method. Our measurement revealed that an increase in Poisson’s ratios of the TC and BC as well as Young’s moduli depended on the temperature and length of exposure. The increasing rate in Poisson’s ratios was lower than that of Young’s moduli for both the TC and BC. These phenomena were explained by focusing on the microcracks and pores of the coatings. © 2020 Society of Materials Science Japan. All rights reserved.
引用
收藏
页码：618 / 625
页数：7
相关论文
共 23 条
  • [1] Waki H., Kitamura T., Kobayashi A., Effect of thermal treatment on high-temperature mechanical properties enhancement in LPPS, HVOF, and APS CoNiCrAlY coatings, Journal of Thermal Spray Technology, 18, 4, pp. 500-509, (2009)
  • [2] Waki H., Oikawa A., Kato M., Takahashi S., Kojima Y., Ono F., Evaluation of the accuracy of Young’s moduli of thermal barrier coatings determined on the basis of composite beam theory, Journal of Thermal Spray Technology, 23, 8, pp. 1291-1301, (2014)
  • [3] Saeidi S., Voisey K. T., McCartney D. G., Mechanical properties and microstructure of VPS and HVOF CoNiCrAlY coatings, Journal of Thermal Spray Technology, 20, 6, pp. 1231-1243, (2011)
  • [4] Girolamo G. D., Alfano M., Pagnotta L., Taurino A., Zekonyte J., Wood R. J. K., On the early stage isothermal oxidation of APS CoNiCrAlY coatings, Journal of Materials Engineering and Performance, 21, 9, pp. 1989-1997, (2012)
  • [5] Itoh Y., Saitoh M., Takahashi M., Thermal and mechanical properties of high velocity oxygen-fuel sprayed MCrAlY coatings, Journal of the Society of Materials Science, Japan, 46, 7, pp. 763-768, (1997)
  • [6] Waki H., Kubo S., Ogi H., Kobayashi A., Measurement of anisotropic Young’s modulus of heat resistant coating by resonance ultrasound spectroscopy, Transactions of the Japan Society of Mechanical Engineers, A, 76, 762, pp. 151-157, (2010)
  • [7] Adachi K., Waki H., Anisotropic elasticity of APS and HVOF CoNiCrAlY coatings studied by resonant ultrasound spectroscopy with laser doppler interferometry, Journal of Thermal Spray Technology, 28, 5, pp. 1017-1024, (2019)
  • [8] Thompson J. A., Clyne T.W., The effect of heat treatment on the stiffness of zirconia top coats in plasma-sprayed TBCs, Acta Materialia, 49, pp. 1565-1575, (2001)
  • [9] Allen A. J., Ilavsky J., Long G. G., Wallace J. S., Berndt C.C., Herman H., Microstructural characterization of yttria-stabilized zirconia plasma-sprayed deposits using multiple small-angle neutron scattering, Acta Materialia, 49, pp. 1661-1675, (2001)
  • [10] Wei Q., Zhu J., Chen W., Anisotropic mechanical properties of plasma-sprayed thermal barrier coatings at high temperature determined by ultrasonic method, Journal of Thermal Spray Technology, 25, 3, pp. 605-612, (2016)
123