The spread of a viscoelastic circular jet and hydraulic jump

被引:1
|
作者
Baayoun, Abdelkader [1 ]
Khayat, Roger E. [1 ]
机构
[1] Univ Western Ontario, Dept Mech & Mat Engn, London, ON N6A 5B9, Canada
基金
加拿大自然科学与工程研究理事会;
关键词
FREE-SURFACE FLOWS; LIQUID JET; FLUID; IMPINGEMENT; STATIONARY; DYNAMICS; GRAVITY; BUBBLE; FILM;
D O I
10.1140/epjs/s11734-024-01179-2
中图分类号
O4 [物理学];
学科分类号
0702 ;
摘要
We examine theoretically the spread of a jet impacting on a circular disk and the hydraulic jump of a viscoelastic fluid of the Oldroyd-B type. The depth-averaging approach is employed in the supercritical region. The subcritical flow is assumed to be inertialess of the lubrication type, and the downstream boundary condition is assumed to be a known parameter. The jump is treated as an abrupt shock, where the balance of mass and momentum is applied across it in the radial direction. The influence of viscoelasticity on the flow behavior is deduced by comparing against the well-established Newtonian limit. The analysis of the flow in the thin-film region reveals that the film thickness increases with viscoelasticity, aligning with the findings of previous studies on viscoelastic thin-film flows. Overall, all elastic stresses diminish downstream of the jump, implying that the contribution of viscoelasticity in the formation of the jump can be predominantly attributed to the rise of the elastic stresses upstream. It is found that viscoelasticity yields an increase in the jump height and a decrease in its radius, resulting in the jump occurring in closer proximity to the impingement point. A dimensionless group involving Deborah number and solute-to-polymer viscosity ratio successfully collapses the predicted jump radius onto a single curve, suggesting the configuration's potential as a rheometer. At high Deborah numbers, the jump radius remains unchanged with varying downstream conditions. As gravity decreases, a small hump in the film manifests in the upstream region, and the jump radius becomes larger.
引用
收藏
页码:1589 / 1614
页数:26
相关论文
共 50 条
  • [11] The influence of heating on liquid jet spreading and hydraulic jump
    Wang, Yunpeng
    Khayat, Roger E.
    JOURNAL OF FLUID MECHANICS, 2020, 883
  • [12] Circular hydraulic jump on finite surfaces with capillary limit
    Mohajer, Behzad
    Li, Ri
    PHYSICS OF FLUIDS, 2015, 27 (11)
  • [13] Non-Circular Hydraulic Jump on a Moving Surface due to an Impinging Circular Free Surface Jet of Water
    Seraj, Mohammad M.
    Gadala, Mohamed S.
    STEEL RESEARCH INTERNATIONAL, 2012, 83 (07) : 653 - 670
  • [14] The circular hydraulic jump; the influence of downstream flow on the jump radius
    Bhagat, Rajesh K.
    Linden, Paul F.
    PHYSICS OF FLUIDS, 2022, 34 (07)
  • [15] Oscillations and Cavity Modes in the Circular Hydraulic Jump
    Goerlinger, Aurelien
    Baudoin, Michael
    Zoueshtiagh, Farzam
    Duchesne, Alexis
    PHYSICAL REVIEW LETTERS, 2023, 131 (19)
  • [16] Numerical and experimental investigations on a circular hydraulic jump due to normal impinging free liquid jet on a flat horizontal target plate
    Todkari, V. C.
    Kate, R. P.
    FLUID DYNAMICS RESEARCH, 2019, 51 (02)
  • [17] The characteristics of the circular hydraulic jump and vortex structure
    Wang, Wenxi
    Baayoun, Abdelkader
    Khayat, Roger E.
    JOURNAL OF FLUID MECHANICS, 2024, 980
  • [18] Steady circular hydraulic jump on a rotating disk
    Ipatova, Anna
    Smirnov, K. V.
    Mogilevskiy, E. I.
    JOURNAL OF FLUID MECHANICS, 2021, 927
  • [19] The interplay between gravity and centrifugal forces in the continuous circular hydraulic jump
    Baayoun, Abdelkader
    Khayat, Roger E.
    PHYSICS OF FLUIDS, 2024, 36 (08)
  • [20] Numerical Study of Circular Hydraulic Jump Using Volume-of-Fluid Method
    Passandideh-Fard, Mohammad
    Teymourtash, Ali Reza
    Khavari, Mohammad
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2011, 133 (01):