Fracture Damage Characteristics of Rock Under Pre-Peak and Post-Peak Cyclic Loading Condition

被引：0

作者：

Tang J. ^{[1
]}

Chen X. ^{[1
]}

Bai Y. ^{[2
]}

机构：

[1] College of Civil and Transportation Engineering, Hohai University, Nanjing

[2] Nanjing Hydraulic Research Institute, Nanjing

来源：

Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University | 2022年 / 56卷 / 12期

关键词：

acoustic emission; cyclic loading; damage index; effective fracture length; rock fracture;

D O I：

10.16183/j.cnki.jsjtu.2021.119

中图分类号：

学科分类号：

摘要：

In the process of rock excavation, cyclic loading may occur before or after the peak value. In order to obtain the fracture damage evolution characteristics of rock under the pre-peak and the post-peak cyclic loading condition, the fracture tests of three-point bending granite beams were conducted by using the digital image correlation method and the acoustic emission technology. Based on the secant modulus, the acoustic emission energy and effective crack length, the rock fracture damage indexes DE, DAE, and DL were constructed respectively, and the rock fracture damage process was quantitatively analyzed. The results show that the damage index of the rock sample has an obvious rate effect. At the same number of cycles, as the loading rate increases, the damage index decreases. For the pre-peak cyclic loading condition, the fracture process of rock from elastic stage to elastic-plastic stage can be well reflected by DE. Under the condition of post-peak cyclic loading, DL can better represent the fracture damage process of rock from step up to continuous failure. © 2022 Shanghai Jiao Tong University. All rights reserved.

引用

页码：1700 / 1709

页数：9

共 22 条

[11] MUNOZ H, TAHERI A, CHANDA E K., Pre-peak and post-peak rock strain characteristics during uniaxial compression by 3D digital image correlation, Rock Mechanics and Rock Engineering, 49, 7, pp. 2541-2554, (2016)
[12] XING Haozhe, WANG Mingyang, FAN Pengxian, Et al., Grain-size effect on dynamic behavior of sandstone based on high-speed 3D-DIC technique, Explosion and Shock Waves, 41, 11, pp. 46-57, (2021)
[13] LI Ying, CHEN Liang, LIU Jianfeng, Et al., Experimental study on influence of saturation process and grain size on the fracture toughness of the Beishan granite, Chinese Journal of Rock Mechanics and Engineering, 37, pp. 3169-3177, (2018)
[14] WANG Zihui, ZHOU Hongwei, AN Lu, Et al., Failure process characteristics and energy evolution of granite under cyclic loading and unloading condition, Journal of China University of Mining & Technology, 49, 5, pp. 874-881, (2020)
[15] XIAO J Q, DING D X, JIANG F L, Et al., Fatigue damage variable and evolution of rock subjected to cyclic loading, International Journal of Rock Mechanics & Mining Sciences, 47, 3, pp. 461-468, (2010)
[16] MENG Q, ZHANG M, HAN L, Et al., Acoustic emission characteristics of red sandstone specimens under uniaxial cyclic loading and unloading compression, Rock Mechanics and Rock Engineering, 51, 4, pp. 969-988, (2018)
[17] JI Weiwei, PAN Pengzhi, MIAO Shuting, Et al., Fracture characteristics of two types of rocks based on digital image correlation, Rock and Soil Mechanics, 37, 8, pp. 2299-2305, (2016)
[18] LV Qi, GAO Jingwu, WU Jinwen, Et al., Study of fracture characteristics of Lu-grey granite based on digital image correlation method, Journal of Experimental Mechanics, 33, 4, pp. 627-633, (2018)
[19] SONG H, HAO Z, FU D, Et al., Experimental analysis and characterization of damage evolution in rock under cyclic loading, International Journal of Rock Mechanics & Mining Sciences, 88, pp. 157-164, (2016)
[20] SONG H, ZHANG H, KANG Y, Et al., Damage evolution study of sandstone by cyclic uniaxial test and digital image correlation, Tectonophysics, 608, pp. 1343-1348, (2013)

← 1 2 3 →