Separation and Extraction of Composite Fault Characteristics of Wind Turbine Bearing Based on SK⁃MOMEDA

被引：0

作者：

Xiang L. ^{[1
]}

Li J. ^{[1
]}

Hu A. ^{[1
]}

Li Y. ^{[1
]}

机构：

[1] Mechanical Engineering Department, North China Electric Power University, Baoding

来源：

Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis | 2021年 / 41卷 / 04期

关键词：

Minimum entropy deconvolution of multi-point optimal adjustment; Separation and extraction; spectral kurtosis; Wind turbine; bearing; composite fault;

D O I：

10.16450/j.cnki.issn.1004-6801.2021.04.002

中图分类号：

学科分类号：

摘要：

For the composite fault of wind turbine rolling bearing in actual working conditions，due to the interac⁃ tion between multiple faults which interfere with each other，making the composite fault feature difficult to sepa⁃ rate. A method for separating and extracting composite fault characteristics of wind turbine rolling bearings is proposed based on spectral kurtosis （SK） and multipoint optimal minimum entropy deconvolution adjusted（MOMEDA. Firstly，the spectral kurtosis analysis is performed on the composite fault signal，and the resonant frequency band with larger energy is selected. The band-pass filter is constructed to filter the corresponding resonant frequency band，and the envelope signal is analyzed by the envelope spectrum to separate the single fault feature. Then，the multipoint kurtosis spectrum analysis is performed on the filtered signal that fails to realize single fault feature extraction，and the fault period is determined. The subsequent separation and extraction process is completed by using MOMEDA. The simulation signal and engineering application analysis results show that the method can effectively and accurately realize the separation and extraction of bearing composite fault features. © 2021, Editorial Department of JVMD. All right reserved.

引用

页码：644 / 651

页数：7

共 17 条

[1]

LI Z, JIANG Y, GUO Q, Et al., Multi-dimensional variational mode decomposition for bearing-crack detection in wind turbines with large driving-speed variations, Renewable Energy, 116, pp. 55-73, (2018)

[2]

TANG Baoping, LUO Lei, DENG Lei, Et al., Research progress in vibration monitoring of wind turbine drive system, Journal of Vibration, Measurement & Diagnosis, 37, 3, pp. 417-425, (2017)

[3]

ZHAO Hongshan, LI Lang, Wind turbine fault diagnosis method based on maximum correlation kurtosis deconvolution and variational mode decomposition, Journal of Solar Energy, 39, 2, pp. 350-358, (2018)

[4]

TENG W, DING X, ZHANG X, Et al., Multi-fault detection and failure analysis of wind turbine gearbox using complex wavelet transform, Renewable Energy, 93, pp. 591-598, (2016)

[5]

WANG Y, LIANG M., Identification of multiple transient faults based on the adaptive spectral kurtosis method, Journal of Sound and Vibration, 331, 2, pp. 470-486, (2012)

[6]

MIAO Y, ZHAO M, LIN J, Et al., Application of an improved maximum correlated kurtosis deconvolution method for fault diagnosis of rolling element bearings, Mechanical Systems and Signal Processing, 92, pp. 173-195, (2017)

[7]

ANTONI J., The spectral kurtosis:a useful tool for characterising non-stationary signals, Mechanical Systems and Signal Processing, 20, 2, pp. 282-307, (2006)

[8]

ANTONI J., Fast computation of the kurtogram for the detection of transient faults, Mechanical Systems and Signal Processing, 21, 1, pp. 108-124, (2007)

[9]

LI Hongkun, YANG Rui, REN Yuanjie, Et al., Fault diagnosis of rolling bearings using particle filter and spectral kurtosis, Journal of Mechanical Engineering, 3, pp. 63-72, (2017)

[10]

WANG Y, LIANG M., Identification of multiple transient faults based on the adaptive spectral kurtosis method, Journal of Sound and Vibration, 331, 2, pp. 470-486, (2012)

← 1 2 →