Proposal of hysteresis model using differential equation

被引：0

作者：

Fukasawa T. ^{[1
]}

Okamura S. ^{[2
]}

Somaki T. ^{[3
]}

Miyagawa T. ^{[4
]}

Yamamoto T. ^{[5
]}

Watakabe T. ^{[5
]}

Morobishi R. ^{[3
]}

Fujita S. ^{[6
]}

机构：

[1] Dept. of Mechanical Systems Engineering, Toyama Prefectural University, Mitsubishi FBR Systems

[2] Engineering Dept., Nuclear Facilities

[3] Dept. of Mechanical Engineering, Tokyo Denki University

来源：

Journal of Structural and Construction Engineering | 2019年 / 84卷 / 763期

关键词：

Curve type; Differential equation; Hysteresis law; Hysteresis loop;

D O I：

10.3130/aijs.84.1231

中图分类号：

学科分类号：

摘要：

This paper describes a new type of hysteresis model consisting of a differential equation that is capable of generating various hysteresis loops as curve type. The proposed hysteresis model can efficiently create the hysteresis loops having the strongly nonlinear characteristics without the hysteresis law because the hysteresis model can treat any target skeleton curves which are identified using the polynomial based on test results and so on. This paper demonstrates that the various types of hysteresis loops were generated in both the static and the dynamic loading conditions to clarify the applicability of the hysteresis model. © 2019 Architectural Institute of Japan. All rights reserved.

引用

页码：1231 / 1241

页数：10

共 24 条

[1]

Matsumiya T., Et al., Collapse Behavior of Steel Moment Resisting Frame and Non-linear Frame Analysis, Journal of Structural and Construction Engineering (Transactions of AIJ), 71, 606, pp. 203-208, (2006)

[2]

Hiraki T., Et al., Seismic response analysis of a seismic isolation system for evaluating mechanical energy balance, Journal of Structural and Construction Engineering (Transactions of AIJ), 82, 733, pp. 405-415, (2017)

[3]

Fukasawa T., Et al., Development on Rubber Bearings for Sodium-cooled Fast Reactor (Part 6: Proposal of new type of hysteresis model for ultimate behavior), Proc. Of ASME Pressure Vessels and Piping Conference

[4]

Ozdemir H., Nonlinear Transient Dynamic Analysis of Yielding Structures, (1976)

[5]

Wen Y.K., Method for random vibration of hysteretic systems, ASCE, Journal of the Engineering Mechanics Division, 102, 2, pp. 249-263, (1976)

[6]

Morishita M., Et al., Development of three-dimensional seismic isolation systems for fast reactor application, Journal of Japan Association for Earthquake Engineering, 4, 3, (2004)

[7]

Takahashi O., Et al., Construction of civil building using three dimensional seismic isolation system, The 14th World Conference on Earthquake Engineering, (2008)

[8]

Tomizawa T., Et al., A study on Earthquake Observation Record in the Building using the Three-Dimensional Seismic Isolation System, Journal of Structural and Construction Engineering (Transactions of AIJ), 77, 679, pp. 1393-1402, (2012)

[9]

Miyagawa T., Et al., Research and development of three dimensional seismic isolation system utilized coned-disc-springs with rubber bearings, Proc. Of ASME Pressure Vessels and Piping Conference

[10]

Liu W., Et al., Static test and seismic dynamic response of an innovative 3D seismic isolation system, ASCE, Journal of Structural Engineering, 144, 12, (2018)

← 1 2 3 →