Analysis of sand erosion mechanism of horizontal pipe bend under dispersed bubble flow

被引:0
|
作者
Peng, Wen-Shan [1 ]
Xing, Shao-Hua [1 ]
Cao, Xue-Wen [2 ]
Hou, Jian [1 ]
Xu, Kun [3 ]
Han, Ming-Yi [4 ]
机构
[1] State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute (LSMRI), Qingdao,266237, China
[2] College of Pipeline and Civil Engineering, China University of Petroleum, Qingdao,266580, China
[3] Huizhou Xingsheng Petrochemical Storage Co. Ltd, Huizhou,516081, China
[4] China Petroleum Longway Engineering Project Management Co. Ltd, Langfang,065000, China
来源
Surface Technology | 2019年 / 48卷 / 04期
关键词
Bubble flow - Dispersed bubble flow - Dispersed bubbles - Erosion mechanisms - Erosion morphology - Gas-liquid distribution - Horizontal pipes - Pipe bend - Severe erosion - VOF model;
D O I
10.16490/j.cnki.issn.1001-3660.2019.04.034
中图分类号
学科分类号
摘要
The work aims to reveal the erosion mechanism of horizontal pipe bend under dispersed bubble flow. A gas-liquid-solid multiphase flow erosion experimental loop was constructed to study the flow state in the pipe bend and the three-dimensional erosion rate of the pipe bend. Microscopic analysis was used to study the erosion morphology of pipe bend. An erosion simulation method based on the coupling of VOF model and DPM model was proposed. Experiment and simulation were combined to analyze the influence of gas-liquid distribution and particle motion on the erosion morphology of the pipe bend. The most severe erosion area of the pipe bend appeared at the exit of the elbow (θ=90°), and the most severe erosion location occurred in the two positions of the section at φ=45° and φ=90°. The simulation results indicated that the edge of the sever erosion area showed a more uniform parabolic shape. The effect of sand on the pipe bend erosion was mainly based on impact deformation and micro-cutting friction. The direct impact collision of the sand caused dense erosion pits on the surface of the sample, and there were lips formed by the outward turning of the base material around the erosion pits. The solid particles in the dispersed bubble flow were mostly entrained in the liquid phase. The stagnation zone at the elbow made the cross-section liquid content and particle content of the cross section at the elbow larger than that at the cross section of the upstream and downstream straight pipes. The presence of gas changed the movement of the sand in the pipeline, greatly increasing the erosion of the pipe bend. The severe erosion area and erosion profile of the horizontal pipe bend under dispersed bubble flow are directly related to the gas-liquid distribution inside the pipeline and the sand movement. Multiphase flow erosion transient simulation can accurately predict pipeline erosion. © 2019, Chongqing Wujiu Periodicals Press. All rights reserved.
引用
收藏
页码:237 / 244
相关论文
共 50 条
  • [21] Modelling of dispersed oil/water flow in a near-horizontal pipe
    Kjolaas, Jorn
    Schuemann, Heiner
    Gonzalez, Diana
    Johansen, Stein Tore
    CHEMICAL ENGINEERING SCIENCE, 2022, 263
  • [22] A sand erosion problem in axial flow conditions on the example of contact erosion due to horizontal groundwater flow
    Scheuermann, A
    Vardoulakis, I
    Papanastasiou, P
    Stavropoulou, M
    IUTAM SYMPOSIUM ON THEORETICAL AND NUMERICAL METHODS IN CONTINUUM MECHANICS OF POROUS MATERIALS, 2001, 87 : 169 - 175
  • [23] Numerical analysis of erosion pattern on pipe elbow bend with swirling flows
    Yam, K. S.
    Roy, S.
    Lee, V. C. C.
    Law, M. C.
    2ND INTERNATIONAL CONFERENCE ON MATERIALS TECHNOLOGY AND ENERGY, 2020, 943
  • [24] Numerical investigation of flow erosion of sand-laden oil flow in a U-bend
    Zhu, Hongjun
    Qi, Yuhang
    PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 2019, 131 : 16 - 27
  • [25] Bubble characteristics and turbulent dissipation rate in horizontal bubbly pipe flow
    Zhao, Weiyang
    Wang, Hang
    Bai, Ruidi
    Wei, Wangru
    Wang, Hongtao
    AIP ADVANCES, 2021, 11 (02)
  • [26] Characterising slug flow in a horizontal pipe using bubble image velocimetry
    Hadzovic, Belma B.
    Aesoy, Eirik
    Leinan, Paul R.
    Dawson, James R.
    INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2025, 188
  • [27] Global stability analysis of a 90°-bend pipe flow
    Lupi, Valerio
    Canton, Jacopo
    Schlatter, Philipp
    INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2020, 86
  • [28] Analysis of slurry flow regimes downstream of a pipe bend
    Giguere, R.
    Fradette, L.
    Mignon, D.
    Tanguy, P. A.
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 2009, 87 (7A): : 943 - 950
  • [30] CFD MODELLING OF SWIRLING MECHANISM TO REDUCE EROSION OF PIPE BEND IN PNEUMATIC CONVEYING SYSTEM
    Yadav, Bharat Singh
    Chaudhary, Rajiv
    Singh, R. C.
    INTERNATIONAL JOURNAL OF MARITIME ENGINEERING, 2024, 1 (01):