Analysis of sand erosion mechanism of horizontal pipe bend under dispersed bubble flow

被引:0
|
作者
Peng, Wen-Shan [1 ]
Xing, Shao-Hua [1 ]
Cao, Xue-Wen [2 ]
Hou, Jian [1 ]
Xu, Kun [3 ]
Han, Ming-Yi [4 ]
机构
[1] State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute (LSMRI), Qingdao,266237, China
[2] College of Pipeline and Civil Engineering, China University of Petroleum, Qingdao,266580, China
[3] Huizhou Xingsheng Petrochemical Storage Co. Ltd, Huizhou,516081, China
[4] China Petroleum Longway Engineering Project Management Co. Ltd, Langfang,065000, China
来源
Surface Technology | 2019年 / 48卷 / 04期
关键词
Bubble flow - Dispersed bubble flow - Dispersed bubbles - Erosion mechanisms - Erosion morphology - Gas-liquid distribution - Horizontal pipes - Pipe bend - Severe erosion - VOF model;
D O I
10.16490/j.cnki.issn.1001-3660.2019.04.034
中图分类号
学科分类号
摘要
The work aims to reveal the erosion mechanism of horizontal pipe bend under dispersed bubble flow. A gas-liquid-solid multiphase flow erosion experimental loop was constructed to study the flow state in the pipe bend and the three-dimensional erosion rate of the pipe bend. Microscopic analysis was used to study the erosion morphology of pipe bend. An erosion simulation method based on the coupling of VOF model and DPM model was proposed. Experiment and simulation were combined to analyze the influence of gas-liquid distribution and particle motion on the erosion morphology of the pipe bend. The most severe erosion area of the pipe bend appeared at the exit of the elbow (θ=90°), and the most severe erosion location occurred in the two positions of the section at φ=45° and φ=90°. The simulation results indicated that the edge of the sever erosion area showed a more uniform parabolic shape. The effect of sand on the pipe bend erosion was mainly based on impact deformation and micro-cutting friction. The direct impact collision of the sand caused dense erosion pits on the surface of the sample, and there were lips formed by the outward turning of the base material around the erosion pits. The solid particles in the dispersed bubble flow were mostly entrained in the liquid phase. The stagnation zone at the elbow made the cross-section liquid content and particle content of the cross section at the elbow larger than that at the cross section of the upstream and downstream straight pipes. The presence of gas changed the movement of the sand in the pipeline, greatly increasing the erosion of the pipe bend. The severe erosion area and erosion profile of the horizontal pipe bend under dispersed bubble flow are directly related to the gas-liquid distribution inside the pipeline and the sand movement. Multiphase flow erosion transient simulation can accurately predict pipeline erosion. © 2019, Chongqing Wujiu Periodicals Press. All rights reserved.
引用
收藏
页码:237 / 244
相关论文
共 50 条
  • [1] Experimental and CFD investigation of flow behavior and sand erosion pattern in a horizontal pipe bend under annular flow
    Peng, Wenshan
    Ma, Li
    Wang, Ping
    Cao, Xuewen
    Xu, Kun
    Miao, Yichun
    PARTICUOLOGY, 2023, 75 : 11 - 25
  • [2] Experiment and numerical simulation of sand particle erosion under slug flow condition in a horizontal pipe bend
    Peng, Wenshan
    Cao, Xuewen
    Hou, Jian
    Xu, Kun
    Fan, Yin
    Xing, Shaohua
    JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING, 2020, 76
  • [3] Dispersed bubble flow in horizontal pipes
    Universita' di Pisa, Pisa, Italy
    Chem. Eng. Sci., 8 (1101-1107):
  • [4] Dispersed bubble flow in horizontal pipes
    Andreussi, P
    Paglianti, A
    Silva, FS
    CHEMICAL ENGINEERING SCIENCE, 1999, 54 (08) : 1101 - 1107
  • [5] Ultrasonic measurements of sand particle erosion under upward multiphase annular flow conditions in a vertical-horizontal bend
    Vieira, Ronald E.
    Parsi, Mazdak
    Zahedi, Peyman
    McLaury, Brenton S.
    Shirazi, Siamack A.
    INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2017, 93 : 48 - 62
  • [6] Modeling of Erosion Wear of Sand Water Slurry Flow through Pipe Bend using CFD
    Singh, V
    Kumar, S.
    Mohapatra, S. K.
    JOURNAL OF APPLIED FLUID MECHANICS, 2019, 12 (03) : 679 - 687
  • [7] Sand erosion measurements under multiphase annular flow conditions in a horizontal-horizontal elbow
    Vieira, Ronald E.
    Parsi, Mazdak
    Zahedi, Peyman
    McLaury, Brenton S.
    Shirazi, Siamack A.
    POWDER TECHNOLOGY, 2017, 320 : 625 - 636
  • [8] Numerical Analysis of Flow Erosion on Sand Discharge Pipe in Nitrogen Drilling
    Zhu, Hongjun
    Lin, Yuanhua
    Feng, Guang
    Deng, Kuanhai
    Kong, Xiangwei
    Wang, Qijun
    Zeng, Dezhi
    ADVANCES IN MECHANICAL ENGINEERING, 2013,
  • [9] Flow of mono-dispersed particles through horizontal bend
    Kaushal, D. R.
    Kumar, A.
    Tomita, Yuji
    Kuchii, Shigeru
    Tsukamoto, Hiroshi
    INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2013, 52 : 71 - 91
  • [10] Numerical study of wall erosion using energy approach for the flow of dense slurry in 90° horizontal pipe bend
    Krishna, Ram
    Kumar, Niranjan
    Gupta, Pankaj Kumar
    POWDER TECHNOLOGY, 2023, 426