Tribology of Glass Fiber Reinforced Borate Modified Phenolic Resin Composite

被引：0

作者：

Wang Y. ^{[1
]}

Cao F. ^{[1
]}

Wang Y. ^{[1
]}

Cao J. ^{[1
]}

Li Z. ^{[1
]}

Wu K. ^{[1
]}

机构：

[1] School of Materials Engineering, Xi'an Aeronautical University, Xi'an

来源：

Cailiao Daobao/Materials Reports | 2021年 / 35卷 / 18期

关键词：

Borate; Phenolic resin; Thermal stability; Tribology;

D O I：

10.11896/cldb.20080163

中图分类号：

学科分类号：

摘要：

This article is prepared for bring the boric acid (BA) and phenylboronic acid (PBA) into phenolic resin (NR), which preparing borate modified phenolic resin to study its curing process, and also improving the use of borate modified phenolic resin as the matrix and glass fiber as the reinforcement. The effect of different boron modification on the friction and wear properties of phenolic resin was prepared. The results showed that both BA and PBA modification can introduce a borate structure into the cured resin, thereby improving the thermal stability of the PR significantly. In addition, the introduction of boric acid esters reduced the friction of PR. Among them, when the PBA content is 30 phr, the friction coefficient is reduced to 0.16 effectively. The SEM showed that the borate can improve the interfacial adhesion performance of the phenolic resin, which improving the friction performance of the modified phenolic resin as efficiently as well. © 2021, Materials Review Magazine. All right reserved.

引用

页码：18210 / 18215

页数：5

共 28 条

[1]

Baekeland L H., Industrial & Engineering Chemistry Research, 1, (1909)

[2]

Huang F., Phenolic resin and its application, (2011)

[3]

Charles U., Pittman J, Gui Z L., Journal of Inorganic and Organometallic Polymers and Materials, 16, 1, (2006)

[4]

Parameswaran P S, Abraham B T, Thachil E T., Progress in Rubber Plastics Recycling Technology, 26, 1, (2010)

[5]

Mirzapour A, Asadollahi M H, Baghshaei S, Et al., Composites Part A: Applied Science and Manufacturing, 63, (2014)

[6]

Wang D, Gao J, Xu W F, Et al., Advanced Materials Research, 327, (2011)

[7]

Akbar N Q, Hossein R M, Mehdi S K, Et al., Journal of Thermal Analysis and Calorimetry, 128, 2, (2017)

[8]

Qiang M, Zhang S, Lin H, Et al., Refractories, 39, 2, (2005)

[9]

Feng L B, Li H, Hao X Z, Et al., Journal of Materials Engineering, 9, (2013)

[10]

Abdalla M O, Ludwick A, Mitchell T., Polymer, 44, 24, (2003)

← 1 2 3 →