Study of Structure and Corrosion Resistance of Abraded Surfaces of Heat-Resistant Structural Steels

被引：0

作者：

Malenko P.I. ^{[1
]}

Kryuchkov O.B. ^{[2
]}

Boldyrev A.E. ^{[1
]}

机构：

[1] Tula State University, Tula

[2] Volgograd State Technical University, Volgograd

来源：

Steel in Translation | 2024年 / 54卷 / 01期

关键词：

antifriction; corrosion-mechanical wear; heat-resistant structural steels; nicotration; ploughing and peeling effects; saturated KCl solution; wear resistance;

D O I：

10.3103/S0967091224700153

中图分类号：

学科分类号：

摘要：

Abstract: The article discusses the factors ensuring high wear resistance and antifriction properties of nicotrated heat-resistant structural steels under conditions of sliding friction in a saturated KCl solution. It is revealed that corrosion-resistant elements do not provide high strength characteristics of steels and do not help reduce the rate of corrosion-mechanical wear. It is shown that the wear destruction of steels is mainly determined by the ploughing effect, and with an increase in the strength properties of steels, there is a transition from the ploughing effect to the peeling effect. © Allerton Press, Inc. 2024. ISSN 0967-0912, Steel in Translation, 2024, Vol. 54, No. 1, pp. 56–61. Allerton Press, Inc., 2024. Russian Text The Author(s), 2024, published in Korroziya: Zashchita, Materialy, 2024, No. 13, pp. 1–8.

引用

页码：56 / 61

页数：5

共 16 条

[1]

Siminovskii I.M., Structure and properties of nicotrized layers on microalloyed structural steels and methods for assessing their wear resistance, (1996)

[2]

Chatterjee-Fischer R., Eysell F.-W., Hoffmann R., Warmebehandlung von Eisenwerkstoffen: Nitrieren und Nitrocarburieren, (1986)

[3]

Lakhtin Y.M., Kogan Y.D., Shpis G.I., Bemer Z.M., Teoriya I Tekhnologiya Azotirovaniya (Theory and Technology of Nitriding), (1991)

[4]

Basalai I.A., Study of corrosion resistance of steels with protective coatings in aggressive media containing chlorides, Protsessy I Sredstva Dobychi I Pererabotki Poleznykh Iskopaemykh. Sbornik Trudov Mezhdunarodnoi Nauchno-Tekhnicheskoi Konferentsii, Posvyashchennoi 80-Letiyu So Dnya Rozhdeniya Zasluzhennogo Rabotnika Vysshei Shkoly Belarusi, Doktora Tekhnicheskikh Nauk, Professora Kislova Nikolaya Vladimirovicha (Processes and Means of Extraction and Processing of Mineral Resources: Proc. In

[5]

Vlasov V.M., Zelenko V.K., Zhigunov K.V., Ivankov I.S., Tribological properties of carbonitrided structural steels, J. Frict. Wear, 23, pp. 86-92, (2002)

[6]

Vlasov V.M., Nechaev L.M., Fomicheva N.B., Influence of technological parameters on tribological behavior of multiphase thermochemical coatings on steels, J. Frict. Wear, 22, (2001)

[7]

Vlasov V.M., Malenko P.I., Goncharov S.S., Kochenikhin A.S., Strengthening combined technologies of surface treatment of parts used in special machine building, Nov. Mater. Tekhnol. Mashinostr., 2, pp. 24-28, (2003)

[8]

Vlasov V.M., Nechaev L.M., Fomicheva N.B., Assessment of the influence of saturating medium parameters on the quality of formed coatings, Izv. Tul. Gos. Univ., Ser. Materialoved., 4, pp. 45-48, (2004)

[9]

Nechaev L.M., Fomicheva N.B., Markova E.V., Kanunnikova I.Y., Application of low-temperature chemicothermal processing technologies for improvement of antifriction properties of steels, Usp. Sovremennogo Estestvoznaniya, 10, (2009)

[10]

Nechaev L.M., Fomicheva N.B., Ivan'Kin I.S., Fomicheva E.V., Investigations of structure and properties of nicotrile coatings, Usp. Sovremennogo Estestvoznaniya, 4, (2007)

← 1 2 →