Heat transfer characteristics of methane-air diffusion flames impinging normally on plane surfaces

被引：0

作者：

Tripathy S. ^{[1
]}

Roul M.K. ^{[2
]}

Rout A.Ku. ^{[2
]}

机构：

[1] School of Mechanical Engineering, KIIT University, Bhubaneswar

[2] Department of Mechanical Engineering, GITA, Bhubaneswar

来源：

Journal of Computational and Applied Research in Mechanical Engineering | 2021年 / 10卷 / 02期

关键词：

Diffusion flame; Equivalence ratio; Heat transfer; Nusselt number; Reynolds number;

D O I：

10.22061/jcarme.2019.3962.1466

中图分类号：

学科分类号：

摘要：

Theoretical investigation of turbulent flame impinging normally on plane surfaces isdone to determine the average Nusselt number and the plate heat flux distribution as functions of jet Reynolds number, equivalence ratio, and separation distance. The analysis is established on the mathematical formulation of the governing equations for conservation of mass, momentum, and energy. The turbulence phenomenon is analyzed with the help of the RNG k-ε turbulence model. The radiative heat transfer model has been designed by using the Discrete Ordinates radiation model. Results show that the heat flux graduallyincreases with the radial distance towards the plate center and attains a maximum value at a location slightly away from the stagnation point. The peak value in the local heat flux comes closer to the stagnation point when the height between the plates and the nozzle increases. Effects of variation of dimensionless separation distance on heat transfer characteristics are investigated. It is observed that heat flux gradually improves when the value of separation distance changes from 12 to 8 and decreases near the stagnation region with the further decrease in separation distance from 8 to 4. © 2021 The author(s).

引用

页码：361 / 372

页数：11

共 32 条

[1]

Baukal C. E., Gebhart B., A review of empirical flame impingement heat transfer correlations, Int. J. Heat Fluid Flow, 17, 4, pp. 386-396, (1996)

[2]

Boke Y. E., Aydin O., Yildizay H. D., The Comparison of Experimental and Predicted Flame Temperature of Natural Gas Combustion, Energy Sources, Part A: Recovery, Util. Environ. Eff, 33, 13, pp. 1271-1280, (2011)

[3]

Chander S., Ray A., Heat transfer characteristics of laminar methane/air flame impinging normal to a cylindrical surface, Exp. Therm. Fluid Sci, 32, 2, pp. 707-721, (2007)

[4]

Cornaro C., Fleischer A.S., Rounds M., Goldstein R. J., Jet impingement cooling of convex semi-cylindrical surface, Int. J. Therm. Sci, 40, 10, pp. 890-898, (2001)

[5]

Dong L. L., Cheung C. S., Leung C. W., Heat transfer from an impinging premixed butane/air slot flame jet, Int. J. Heat Mass Transfer, 45, 5, pp. 979-992, (2002)

[6]

Hou S. S., Ko Y. C., Influence of oblique angle and heating height on flame structure temperature field and efficiency of an impinging laminar jet flame, Energy Convers. Manage, 46, 6, pp. 941-958, (2005)

[7]

Kuntikana P., Prabhu S. V., Isothermal air jet and premixed flame jet pingement Heat transfer characterization and comparison, Int. J. Therm. Sci, 100, pp. 401-415, (2016)

[8]

Agrawal G. K., Chakraborty S., Som S. K., Heat transfer characteristics of premixed flame impinging upwards to plane surfaces inclined with the flame jet axis, Int. J. Heat Mass Transfer, 53, 9-10, pp. 1899-1907, (2010)

[9]

Lee H., Chung Y. S., Kim D. S., Turbulent flow heat transfer measurement on curved surface with fully developed round impinging jet, Int. J. Heat Fluid Flow, 18, 1, pp. 60-169, (1997)

[10]

Tripathy S., Rout A. K., Roul M. K., Heat Transfer due to Impinging Flame on Plane Surface, Int. Organ. Sci. Res, 13, pp. 27-34, (2016)

← 1 2 3 4 →