Effect of ribbed rotation on heat storage performance of phase change thermal storage unit and field synergy analysis

被引：0
|
作者：
Tian Y. [1 ]
Zhao M. [1 ]
Hu M. [1 ]
Zhang F. [1 ]
机构：
[1] School of Energy and Power Engineering, University of Shanghai for Science and Technology, Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering, Shanghai
来源：
Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2021年 / 42卷 / 03期
关键词：
Field synergy; Numerical simulation; Phase change thermal storage; Rotation; Rotational speed;
D O I：
10.19912/j.0254-0096.tynxb.2018-1018
中图分类号：
学科分类号：
摘要：
The phase change heat storage model with rib rotation was established. The heat storage characteristics of the model at different speeds were studied by numerical simulation, and the corresponding thermal analysis was carried out by field synergy theory. The results shown that the ribbing and rotation can significantly improve the heat storage effect of the phase change thermal storage unit and shorten the heat storage time, the field synergy angle of the heat storage process can be reduced by increasing the rotation speed, but the excessively high lifting speed will increase the coordination angle. Reduce the synergy between flow and heat transfer. From the perspective of energy saving and field synergy, it is not advisable to increase the speed too high, and the speed control is optimal in the range of 0.1-0.3 r/min. © 2021, Solar Energy Periodical Office Co., Ltd. All right reserved.
引用
收藏
页码：395 / 400
页数：5
相关论文
共 12 条
  • [1] LENG G H, LAN Z P, GE Z W, Et al., Research progress of thermal storage materials, Energy storage science and technology, 4, 2, pp. 119-130, (2015)
  • [2] MESALHY O, LAFDI K, ELGAFI A, Et al., Numerical study for enhancing the thermal conductivity of phase change material(PCM)storage using high thermal conductivity porous matrix, Energy convers manage, 46, pp. 847-867, (2005)
  • [3] MOSAFFA A, FERREIRA C I, TALATI F, Et al., Thermal performance of a multiple PCM thermal storage unit for free cooling, Energy conversion and management, 67, pp. 1-7, (2013)
  • [4] ZHANG F M, ZHAO M., Optimization of heat storage performance of separated cells tube based on multi-phase change material, Acta energiae solaris sinica, 41, 7, pp. 227-236, (2020)
  • [5] CAO X L, YUAN Y P, XIANG B., Effect of natural convection on melting performance of eccentric horizontal shell and tube latent heat storage unit, Sustainable cities and society, 38, pp. 571-581, (2018)
  • [6] AGYENIM F, EAMES P, SMYTH M., A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins, Solar energy, 83, 9, pp. 1509-1520, (2009)
  • [7] YUAN Y P, CAO X L, XIANG B, Et al., Effect of installation angle of fins on melting characteristics of annular unit for latent heat thermal energy storage, Solar energy, 136, pp. 365-378, (2016)
  • [8] JUNDIKA C K, AGUS P S., Numerical investigation of heat transfer performance of a rotating latent heat thermal energy storage, Applied energy, 199, pp. 347-358, (2017)
  • [9] GUO Z Y., Physical mechanism and control of convective heat transfer: synergy between velocity field and heat flow field, Chinese science bulletin, 45, 19, pp. 2118-2122, (2000)
  • [10] MENG J A., Longitudinal vortex enhanced heat transfer technology based on field synergy theory and its application, (2003)
12