The Scheme of Lightweight Integrated Mixing Transmission Based on Flat Motor for Tracked Vehicle

被引：0

作者：

Zou T. ^{[1
,2
]}

Yan Q. ^{[2
]}

Gai J. ^{[1
]}

Hou W. ^{[1
]}

Wang Z. ^{[3
]}

Shuai Z. ^{[1
]}

Sun X. ^{[1
]}

机构：

[1] China North Vehicle Research Institute, Beijing

[2] School of Mechanical Engineering, Beijing Institute of Technology, Beijing

[3] Unit 32381 of PLA, Beijing

来源：

Binggong Xuebao/Acta Armamentarii | 2021年 / 42卷 / 10期

关键词：

Lightweight integrated mixing transmission; Maneuvering characteristics; Tracked vehicle; Transmission scheme;

D O I：

10.3969/j.issn.1000-1093.2021.10.019

中图分类号：

学科分类号：

摘要：

According to the requirements of tracked vehicles for high power supply capacity, high volume power density, high mobility, multi-function, light weight, etc., a lightweight integrated mixing transmission based on flat motor is proposed by using the multi-objective comprehensive evaluation method to optimize a variety of transmission types, such as integrated hydro mechanical transmission, composite electro-mechanical transmission, pure electric drive, comprehensive heavy hybrid drive and light comprehensive hybrid drive. In the proposed scheme, the development trend and technical maturity of integrated hydro mechanical transmission and electric drive technology are considered.The proposed scheme can effectively tackle the problem of insufficient power supply capacity of integrated hydro mechanical transmission, improve the volume power density, enhance the mobility, expand the function of vehicle power cabin, and effectively control the weight. For the proposed scheme, the parameters were matched, and the maneuverability was predicted. The results show that the proposed scheme can effectively solve the layout and installation of vehicle power cabin, and avoid other problems caused by the long direction of vehicle compared to the original scheme, and the structure is reasonable and feasible. © 2021, Editorial Board of Acta Armamentarii. All right reserved.

引用

页码：2233 / 2241

页数：8

共 23 条

[1]

LIAO Z L, MA X J, ZANG K M, Et al., Research on status quo and key technologies of all-electric combat vehicle, Fire Control and Command Control, 33, 5, pp. 1-4, (2008)

[2]

Me ZYK A, CZAPLA T, KLEIN W., Hybrid drive application for high-speed tracked vehicle, Journal of KONES Powertrain and Transport, 16, 1, pp. 341-349, (2009)

[3]

LI X J, XU L F, HUA J F, Et al., Control algorithm of fuel cell/battery hybrid vehicular power system, Proceedings of Vehicle Power and Propulsion Conference, (2008)

[4]

ZOU Y., Key technology of electrical transmission and its overview, Value Engineering, 35, 36, pp. 113-114, (2016)

[5]

SUN F C, ZHANG C N., Technologies for the hybrid electric drive system of armored vehicle, (2016)

[6]

ZOU Y, WU J L, TIAN Y, Et al., Automated modeling method for tracked vehicle hybrid drive systems, China Mechanical Engineering, 29, 15, pp. 1808-1817, (2018)

[7]

CHEN L, ZHU F T, ZHANG M M, Et al., Design and analysis of an electrical variable transmission for a series-parallel hybrid electric vehicle, IEEE Transactions on Vehicular Technology, 60, 5, pp. 2354-2363, (2011)

[8]

MANSOUR C, CLODIC D., Dynamic modeling of the electro-mechanical configuration of the Toyota hybrid system series/parallel power train, International Journal of Automotive Technology, 13, 1, pp. 143-166, (2012)

[9]

ZHAO L Q., Research and development of engine-generator control system of electric drive system in tank and armored vehicle, pp. 49-63, (2004)

[10]

TIAN Y., Automated modeling research for hybrid drive system of tracked vehicle, (2015)

← 1 2 3 →