Damage effect of concrete cast-in-situ piles under sulfate attack

被引：0

作者：

Li J. ^{[1
,2
]}

Xie F. ^{[1
,2
]}

Li L. ^{[1
,2
]}

Zhao G. ^{[1
,2
]}

机构：

[1] Department of Geotechnical Engineering, Tongji University, Shanghai

[2] Key Lab of Geotechnical and Underground Engineering (Tongji University), Ministry of Education, Shanghai

来源：

Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology | 2019年 / 51卷 / 06期

关键词：

Bearing capacity; Concrete cast-in-situ pile; Damage degree; Numerical calculation; Sulfate attack;

D O I：

10.11918/j.issn.0367-6234.201808079

中图分类号：

学科分类号：

摘要：

In order to analyze the effect of external sulfate attack on the durability of concrete cast-in-situ piles, the diffusion-reaction behavior of sulfate ion for concrete cast-in-situ piles was studied and the factors that affect the degradation of pile structure were analyzed. Based on the Fick's second law, the non-steady diffusion-reaction equation of sulfate ion under column coordinates was established. The finite difference scheme for solving the diffusion equation was obtained by the numerical method. The accuracy of the theoretical model and the calculation method was verified by related experimental results. Expansion strain was obtained according to the expansion product produced by chemical reaction. The damage and bearing capacity of pile were calculated by damage evolution equation. The correlation between damage degree and bearing capacity was established. Influences of different corrosion factors and corrosion time on the damage and bearing capacity of pile were compared and analyzed. Results indicate that the internal expansion strain and damage developed more rapidly on the surface than in the interior layers. The increase of pile radius could significantly improve the durability and bearing capacity of the pile. When the water-cement ratio was larger than 0.4, the damage degree of the pile experienced the biggest growth. Therefore, the reasonable increase of pile radius and the use of smaller water-cement ratio can effectively reduce concrete damage, improve pile durability, and reduce the loss of bearing capacity of pile. © 2019, Editorial Board of Journal of Harbin Institute of Technology. All right reserved.

引用

页码：89 / 94

页数：5

共 18 条

[1]

Li J., Li L., Chen H., Et al., Advances in concrete pile durability in corrosive environment, Journal of Harbin Institute of Technology, 49, 12, (2017)

[2]

Zuo X., Sun W., Full process analysis of damage and failure of concrete subjected to external sulfate attack, Journal of the Chinese Ceramic Society, 37, 7, (2009)

[3]

Tixier R., Mobasher B., Modeling of damage in cement-based materials subjected to external sulfate attack. I: formulation, Journal of Materials in Civil Engineering, 15, 4, (2003)

[4]

Li J., Yao M., Shao W., Diffusion-reaction model of stochastically mixed sulfate in cast-in-situ piles, Construction and Building Materials, 115, (2016)

[5]

Tai I., Cavalaro S.H.P., Segura I., Et al., Simplified methodology to evaluate the external sulfate attack in concrete structures, Materials and Design, 89, (2016)

[6]

Zuo X., Sun W., Yu C., Numerical investigation on expansive volume strain in concrete subjected to sulfate attack, Construction and Building Materials, 36, 4, (2012)

[7]

Sarkar S., Mahadevan S., Meeussen J.C.L., Et al., Numerical simulation of cementitious materials degradation under external sulfate attack, Cement and Concrete Composites, 32, 3, (2010)

[8]

Yin G., Zuo X., Tang Y., Et al., Numerical simulation on time-dependent mechanical behavior of concrete under coupled axial loading and sulfate attack, Ocean Engineering, 142, (2017)

[9]

Chen J., Qian C., Song H., A new chemo-mechanical model of damage in concrete under sulfate attack, Construction and Building Materials, 115, (2016)

[10]

Sun C., Chen J., Zhu J., Et al., A new diffusion model of sulfate ions in concrete, Construction and Building Materials, 39, 1, (2013)

← 1 2 →