Multi-Objective Aerodynamic Optimization on Head Shape of High-Speed Train Using Kriging Surrogate Model with Hybrid Infill Criterion

被引：0

作者：

Dai Z. ^{[1
]}

Li T. ^{[1
]}

Zhang W. ^{[1
]}

Zhang J. ^{[1
]}

机构：

[1] State Key Laboratory of Rail Transit Vehicle System, Southwest Jiaotong University, Chengdu

来源：

Xinan Jiaotong Daxue Xuebao/Journal of Southwest Jiaotong University | 2024年 / 59卷 / 01期

关键词：

aerodynamic optimization; high-speed train; hybrid infill criterion (HIC); surrogate model;

D O I：

10.3969/j.issn.0258-2724.20220218

中图分类号：

学科分类号：

摘要：

In the multi-objective aerodynamic optimization design of high-speed trains, the optimization efficiency of the surrogate model established using the traditional infill criterion is low when the initial sample points are few. To this end, a hybrid infill criterion (HIC) was proposed by combining the improved expectation infill criterion (EIC) and the Pareto solution infill criterion (PIC). Meanwhile, a Kriging surrogate model was established using the HIC method, and multi-objective aerodynamic optimization on the head shape of the high-speed train was conducted, with the minimum aerodynamic drag force of the leading car, the minimum aerodynamic drag and lift force of the rear car as the objectives. The single-objective Branin test function and the multi-objective Poloni test function were taken as examples, and the convergence speed of EIC, PIC, and HIC surrogate models was compared. The results show that the optimization efficiency of the HIC surrogate model is improved by 50.0% compared with the EIC and PIC surrogate models in the single-objective optimization. For the multi-objective test function, the efficiency of the HIC surrogate model is improved by 62.5% compared with the PIC surrogate model. Moreover, the HIC surrogate model is used to carry out the multi-objective aerodynamic optimization of the head shape of the high-speed train, and the optimal solution model obtained reduces the above three objectives respectively by 1.6%, 1.7%, and 3.0% compared with the original model. The heights of the nose, the coupler area, and the cab window of the optimal solution are all reduced. Meanwhile, the two lateral contour lines are retracted. © 2024 Science Press. All rights reserved.

引用

页码：46 / 53

页数：7

共 22 条

[1]

JEONG S, MURAYAMA M, YAMAMOTO K., Efficient optimization design method using kriging model[J], Journal of Aircraft, 42, 2, pp. 413-420, (2005)

[2]

KUHNT S, STEINBERG D M., Design and analysis of computer experiments[J], AStA Advances in Statistical Analysis, 94, 4, pp. 307-309, (2010)

[3]

FORRESTER A I J, KEANE A J., Recent advances in surrogate-based optimization[J], Progress in Aerospace Sciences, 45, pp. 50-79, (2009)

[4]

WANG Q Q, MOIN P, IACCARINO G., A rational interpolation scheme with superpolynomial rate of convergence[J], SIAM Journal on Numerical Analysis, 47, 6, pp. 4073-4097, (2010)

[5]

HAN Zhonghua, Kriging surrogate model and its application to design optimization: a review of recent progress, Acta Aeronautica et Astronautica Sinica, 37, 11, pp. 3197-3225, (2016)

[6]

SUN Z X, SONG J J, AN Y R., Optimization of the head shape of the CRH3 high speed train[J], Science China: Technological Sciences, 53, 12, pp. 3356-3364, (2010)

[7]

LEE J, KIM J., Approximate optimization of high-speed train nose shape for reducing micropressure wave[J], Structural and Multidisciplinary Optimization, 35, 1, pp. 79-87, (2008)

[8]

YAO S B, GUO D L, SUN Z X, Et al., Optimization design for aerodynamic elements of high speed trains[J], Computers & Fluids, 95, pp. 56-73, (2014)

[9]

YAO S B, GUO D L, SUN Z X, Et al., Parametric design and optimization of high speed train nose[J], Optimization and Engineering, 17, 3, pp. 605-630, (2016)

[10]

ZHANG N, WANG P, DONG H C, Et al., Shape optimization for blended-wing –body underwater glider using an advanced multi-surrogate-based high-dimensional model representation method[J], Engineering Optimization, 52, 12, pp. 2080-2099, (2020)

← 1 2 3 →