High development characteristics of water flowing fractured zone in fully-mechanized top-caving mining of extremely thick coal seam under water

被引:0
|
作者
Li X. [1 ,2 ,3 ]
Huang Q. [1 ,3 ]
机构
[1] School of Energy Engineering, Xi'an University of Science and Technology, Xi'an
[2] Shaanxi Railway Institute, Weinan
[3] Key Laboratory of Western Mine and Hazard Prevention, Ministry of Education, Xi'an
来源
Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering | 2022年 / 39卷 / 01期
关键词
Deformation analysis method; Extremely thick coal seam; Full-mechanized top-caving mining; Key stratum; Numerical simulation; Water flowing fractured zone;
D O I
10.13545/j.cnki.jmse.2020.0442
中图分类号
学科分类号
摘要
With fully-mechanized top-caving mining under Beirui River in working face 3203 of Chenjiagou Coal Mine as research object, the height of water flowing fractured zone in the working face was studied through deformation analysis and numerical simulation. Research results have shown that maximum height (124 m) of water flowing fractured zone with full-mechanized top-caving mining of working face 3203 appears on the side of open-off cut with fracture mining ratio of 11.7; final shape of water flowing fractured zone is a deviated "saddle". The structure of overlying rock has a significant impact on characteristics of water flowing fractured zone, and development height of water flowing fractured zone increases stepwise with periodic breakage of key stratum in overlying strata. When water flowing fractured zone develops to a certain level, the soft rock of certain thickness in the overlying strata is the key rock layer (inhibition layer) that inhibits continuous upward development of water flowing fractured zone. Therefore, according to structural characteristics of overlying strata, it is more practical to determine the height of water flowing fractured zone by partition area. Based on the predicted result of aquifer fracture zone height, the original mining plan of working face 3203 was revised, and a plan for total top coal release was proposed, which improves the resource recovery rate. © 2022, Editorial Board of Journal of Mining & Safety Engineering. All right reserved.
引用
收藏
页码:54 / 61
页数:7
相关论文
共 26 条
  • [1] QIAN Minggao, XU Jialin, Behaviors of strata movement in coal mining, Journal of China Coal Society, 44, 4, pp. 973-984, (2019)
  • [2] (2017)
  • [3] YUAN Ruifu, DU Feng, SONG Changsheng, Et al., In-site monitoring and analysis on overburden movements for multiple seam mining using longwall caving method, Journal of Mining & Safety Engineering, 35, 4, pp. 717-724, (2018)
  • [4] GUO Wenbing, LOU Gaozhong, Definition and distinguishing method of critical mining degree of overburden failure, Journal of China Coal Society, 44, 3, pp. 755-766, (2019)
  • [5] HUANG Qingxiang, Research on roof control of water conservation mining in shallow seam, Journal of China Coal Society, 42, 1, pp. 50-55, (2017)
  • [6] XU Jialin, ZHU Weibing, WANG Xiaozhen, New method to predict the height of fractured water-conducting zone by location of key strata, Journal of China Coal Society, 37, 5, pp. 762-769, (2012)
  • [7] WANG Xiaozhen, XU Jialin, HAN Hongkai, Et al., Stepped develop-ment characteristic of water flowing fracture height with variation of mining thickness, Journal of China Coal Society, 44, 12, pp. 740-3749, (2019)
  • [8] TI Zhengyi, ZHANG Feng, QIN Hongyan, Et al., Risk judgment technology of water accumulation in overlying goaf based on plate shell and fracture mechanics theory, Coal Geology & Exploration, 47, 1, pp. 138-143, (2019)
  • [9] WU Q, SHEN J J, LIU W T, Et al., A RBFNN-based method for the prediction of the developed height of a water-conductive fractured zone for fully mechanized mining with sublevel caving, Arabian Journal of Geosciences, 10, 7, pp. 1-9, (2017)
  • [10] LIU S L, LI W P, WANG Q Q., Height of the water-flowing fractured zone of the Jurassic coal seam in Northwestern China, Mine Water and the Environment, 37, 2, pp. 312-321, (2018)