Study on the Effect of Fine Particle Content on Static Liquefaction Instability of Saturated Silty Sands by Triaxial Tests

被引：0

作者：

Lyu X. ^{[1
,2
]}

Weng M. ^{[1
,2
]}

Cai J. ^{[3
]}

Zhang B. ^{[1
,2
]}

机构：

[1] Key Laboratory of Geotechnical and Underground Engineering of the Ministry of Education, Tongji University, Shanghai

[2] College of Civil Engineering, Tongji University, Shanghai

[3] Shanghai Geological and Mineral Engineering Investigation Co., Ltd., Shanghai

来源：

| 1600年 / Science Press卷 / 49期

关键词：

Clay; Sand; Second order work; Static liquefaction; Triaxial shear test;

D O I：

10.11908/j.issn.0253-374x.20455

中图分类号：

学科分类号：

摘要：

The effects of initial relative density, fine particle content and consolidation mode on static liquefaction of sand were studied by using consolidated undrained triaxial shear test. For pure Toyoura sand, the stress-strain relationship of medium dense and dense samples shows continuous strain hardening characteristic, and the pore pressure first increases and then decreases to negative values. The continuously strain softening occurs only in the very loose sample (Dr=5 %). The results indicate that when the content of fine particles is low, the sand is more prone to strain softening. Based on the test results and the calculated second-order work, the stress ratio corresponding to the triggering point of static liquefaction instability of sand is obtained. The stress ratio increases with the increase of initial compactness and decreases with the increase of fine-grained content, indicating that loose specimen with a high fine-grain content is apt to trigger static liquefaction instability. © 2021, Editorial Department of Journal of Tongji University. All right reserved.

引用

页码：1128 / 1134

页数：6

共 21 条

[1]

LADE P V, YAMAMURO J A, LIGGIO C D., Effects of fines content on void ratio, compressibility, and static liquefaction of silty sand, Geomechanics & Engineering, 1, 1, (2009)

[2]

ZHU Jianqun, KONG Lingwei, GAO Wenhua, Et al., Steady-state properties of Nanjing sand, Chinese Journal of Geotechnical Engineering, 34, 5, (2012)

[3]

SABBAR A S, CHEGENIZADEH A, NIKRAZ H., Static liquefaction of very loose sand-slag -bentonite mixtures, Soils & Foundations, 57, 3, (2017)

[4]

MOHAMAD R, DOBRY R., Undrained monotonic and cyclic triaxial strength of sand, Journal of Geotechnical Engineering, 112, 10, (1986)

[5]

YAMAMURO J A, LADE P V., Steady-state concepts and static liquefaction of silty sands, Journal of Geotechnical and Geoenvironmental Engineering, 124, 9, (1998)

[6]

AMINI F, Qi G Z., Liquefaction testing of stratified silty sands, Journal of Geotechnical and Geoenvironmental Engineering, 126, 3, (2000)

[7]

SINGH S., Liquefaction characteristics of silts, Geotechnical and Geological Engineering, 14, 1, (1996)

[8]

ZLATOVIC S, ISHIHARA K., Normalized behavior of very loose nonplastic soil: Effects of fabric, Soils and Foundation, 37, 4, (1997)

[9]

CHOO H, BURNS S E., Shear wave velocity of granular mixtures of silica particles as a function of finer fraction, size ratios and void ratios, Granular Matter, 17, 5, (2015)

[10]

BENAHMED N, NGUYEN T K, HICHER P Y, Et al., An experimental investigation into the effects of low plastic fines content on the behaviour of sand/silt mixtures, European Journal of Environmental and Civil Engineering, 19, 1, (2015)

← 1 2 3 →