Thermal-hydraulic Analysis of Lead-bismuth Reactor under Moving Condition

被引：0
|
作者：
Liu Z. [1 ]
Wang C. [1 ,2 ]
Zhang D. [1 ,2 ]
Tian W. [1 ,2 ]
Qiu S. [1 ,2 ]
Su G. [1 ,2 ]
机构：
[1] School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an
[2] State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an
来源：
Yuanzineng Kexue Jishu/Atomic Energy Science and Technology | 2021年 / 55卷 / 05期
关键词：
Moving condition; Natural circulation; Small modular lead-bismuth reactor; Thermal-hydraulic;
D O I：
10.7538/yzk.2020.youxian.0406
中图分类号：
学科分类号：
摘要：
In order to study the thermal-hydraulic characteristics of the lead-bismuth reactor under moving conditions, the transient analysis system program for the lead-bismuth reactor was developed, and the numerical model of the designed 5 MW natural circulation small modular lead-bismuth reactor was completed. The results show that under inclined conditions, the core mass flow rate decreases and the core outlet temperature increases. At the maximum inclined angle, the mass flow rate decreases by 20% and the core outlet temperature increases by 20 ℃. Under heaving conditions, the larger the fluctuation amplitude and the fluctuation period are, the greater impact on the reactor will be. Due to the flow resistance, the flow rate change has a delay of less than 1 s compared to the additional acceleration. Under rolling conditions, larger rolling amplitude angle and smaller rolling period will induce greater influence on the reactor. The peak temperature of the fuel cladding is within 20 ℃ higher than the steady-state value, which has little effect on the safety of the reactor. © 2021, Editorial Board of Atomic Energy Science and Technology. All right reserved.
引用
收藏
页码：811 / 821
页数：10
相关论文
共 25 条
  • [1] KIM J H, PARK G C., Development of RETRAN-03/MOV code for thermal-hydraulic analysis of nuclear reactor under moving conditions, Journal of the Korean Nuclear Society, 28, 6, pp. 542-550, (1996)
  • [2] ISHIDA I, KUSUNOKI T, MURATA H, Et al., Thermal-hydraulic behavior of a marine reactor during oscillations, Nuclear Engineering and Design, 120, 2-3, pp. 213-225, (1990)
  • [3] ISHIDA T, KUSUNOKI T, OCHIAI M, Et al., Effects by sea wave on thermal hydraulics of marine reactor system, Journal of Nuclear Science and Technology, 32, 8, pp. 740-751, (1995)
  • [4] LI Yongquan, YAN Binghuo, YU Lei, Experimental research on operational characteristics of passive residual heat removal system under rolling motion, Atomic Energy Science and Technology, 44, pp. 222-226, (2010)
  • [5] TAN Sichao, ZHANG Hongyan, PANG Feng-ge, Et al., Characteristics of single-phase natural circulation under rolling, Nuclear Power Engineering, 26, 6, pp. 554-558, (2005)
  • [6] GAO Puzhen, PANG Fengge, LIU Shuyi, Et al., Effects of listing upon forced circulation and natural circulation, Chinese Journal of Nuclear Science and Engineering, 17, 2, pp. 88-92, (1997)
  • [7] PANG Fengge, GAO Puzhen, WANG Zhao-xiang, Et al., Theoretical research for effect of ocean conditions on natural circulation, Nuclear Power Engineering, 16, 4, pp. 330-335, (1995)
  • [8] YANG Jue, JIA Baoshan, YU Jiyang, Analysis of natural circulation ability in PWR coolant system under ocean condition, Chinese Journal of Nuclear Science and Engineering, 22, 3, pp. 199-203, (2002)
  • [9] YAN Binghuo, YU Lei, Development and validation of thermal hydraulic code in rolling motion, Atomic Energy Science and Technology, 46, 1, pp. 15-19, (2012)
  • [10] HUANG Zhen, GAO Puzhen, TAN Sichao, Et al., Mechanism analysis of effect of rolling motion on heat transfer, Nuclear Power Engineering, 31, 3, pp. 52-56, (2010)
123