Prediction model of asphalt emulsion evaporation rate based on CFD simulation and genetic programming-based symbolic regression

被引：0

作者：

Ouyang, Jian ^{[1
,2
]}

Jiang, Zhao ^{[2
,3
]}

Yang, Hanwen ^{[4
]}

Li, Jing ^{[3
]}

Cao, Peng ^{[5
]}

机构：

[1] School of civil engineering and architecture, Hainan University, Haikou,570000, China

[2] School of Transportation and Logistics, Dalian University of Technology, Dalian,116024, China

[3] Hexagon Manufacturing Intelligence (Qingdao) Co., Ltd, Qingdao,266000, China

[4] School of Civil Engineering, Dalian University of Technology, Dalian,116024, China

[5] Faculty of Architecture, Civil and Transportation Engineering, Beijing University of Technology, Beijing,100124, China

来源：

Construction and Building Materials | 2024年 / 416卷

基金：

中国国家自然科学基金;

关键词：

Computational fluid dynamics - Emulsification - Evaporation - Genetic programming - Regression analysis - Temperature - Wind;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The evaporation rate of asphalt emulsion is critical to the strength development of asphalt emulsion materials. Its value is dependent on environmental factors, i.e. relative humidity, temperature, and wind speed. However, the quantitative relation of evaporation rate with these environmental factors are unclear. To quantificationally study the effect of environmental factors on the water evaporation rate of asphalt emulsion, a computational fluid dynamics (CFD) simulation model of water evaporation is firstly proposed and validated by experiment. Then, wide range of environmental factors are studied in the CFD simulation model, and genetic programming-based symbolic regression is used to train the simulation results of CFD samples. Finally, a relatively accurate prediction equation of the evaporation rate of asphalt emulsion versus environmental factor is proposed, and the sensitivity of the water evaporation rate under the three environmental factors is analyzed. Results show that the evaporation rate can be accurately simulated by CFD. All the three environmental factors can greatly affect the evaporation rate of asphalt emulsion, while their effect on the sensitivity of the water evaporation rate is ranked as: temperature > relative humidity > wind speed. To ensure an acceptable curing period, asphalt emulsion-based materials should be avoided to be paved in the conditions of low temperature and high relative humidity. © 2024 Elsevier Ltd

引用