Influence of pulse duration on the fatigue behavior of a carbon-fiber-reinforced composite under cyclic three-point bending at 20 kHz

被引：0

作者：

Premanand, Aravind ^{[1
]}

Balle, Frank ^{[1
,2
,3
]}

机构：

[1] Walter-and-Ingeborg-Herrmann Chair for Power Ultrasonics and Engineering of Functional Materials (EFM), Department for Sustainable Systems Engineering (INATECH), Faculty of Engineering, University of Freiburg, Freiburg, Germany

[2] Freiburg Materials Research Center (FMF), Freiburg, Germany

[3] Fraunhofer Institute for High Speed Dynamics, Ernst Mach Institute (EMI), Freiburg, Germany

来源：

Fatigue and Fracture of Engineering Materials and Structures | 2024年 / 47卷 / 05期

关键词：

Very high cycle fatigue (VHCF) experiments are limited in practice due to their long testing times. In ultrasonic fatigue test (UFT) systems; the cyclic oscillation is applied using resonance at 20 kHz with a pulse and pause sequence. However; determining optimal pulse durations to achieve minimal testing time and avoid thermal-induced fatigue damage in fiber-reinforced polymer composites remains a challenge. In this work; several fatigue experiments; temperature analyses; and digital light optical microscopy were carried out to evaluate the influence of pulse duration on the fatigue behavior of a carbon-fiber fabric reinforced in polyether-ketone-ketone (CF-PEKK) composite. A shorter pulse duration with the same pulse–pause ratio as the longer pulse duration is proposed for higher stress amplitudes to avoid any thermal influence during mechanical fatigue without altering the underlying fatigue damage mechanisms. © 2024 The Authors. Fatigue & Fracture of Engineering Materials & Structures published by John Wiley & Sons Ltd;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

引用

页码：1731 / 1747