Research Advances of Laser-induced Micro-nano Joining Technology

被引：0
作者：
Wang L. [1 ]
Ding Y. [1 ]
Wang G. [1 ]
Guan Y. [1 ]
Wang Y. [1 ]
Yang L. [1 ]
机构：
[1] Key Laboratory of Micro-systems and Micro-structures Manufacturing, Ministry of Education, Harbin Institute of Technology, Harbin
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2022年 / 58卷 / 02期
关键词：
Laser; Micro-nano joining; Nano membranes; Nanoparticles; Nanowires; Transparent electrode;
D O I：
10.3901/JME.2022.02.088
中图分类号：
学科分类号：
摘要：
With the development of aviation, electronics and energy technologies, complex electronic devices and systems with low-dimensional nanomaterials as functional units tend to be flexible and miniaturized, and this process depends on the high-quality connections between nanomaterials. The size and structure limitations of micro-nano materials make it difficult for traditional methods such as thermal annealing, mechanical pressing, chemical treatment and electron beam irradiation to avoid the damage of non-joining areas while constructing effective joining. However, laser processing has been widely concerned because of its advantages such as small focal spot size, good monochromaticity and easy accurate control of energy input. In order to clarify the practical application significance and potential application prospect of laser in micro-nano connection field, firstly analyzes the transient interaction mechanism between ultrafast laser and conventional laser in the formation of micro-nano joining, and then summarizes in detail the laser joining strategies of zero-dimensional nanoparticles, one-dimensional nano-wires, two-dimensional nano-films and mixed-dimensional materials, and introduces the application of the network structure obtained by connecting nano-materials in transparent electrodes. Finally, the shortcomings of the current laser micro-nano connection technology are analyzed, and the future development is prospected. © 2022 Journal of Mechanical Engineering.
引用
收藏
页码：88 / 99
页数：11
相关论文
共 58 条
[51]  
YE S, RATHMELL A R, CHEN Z, Et al., Metal nanowire networks: The next generation of transparent conductors, Advanced Materials, 26, 39, pp. 6670-6687, (2014)
[52]  
NOH J, KIM D., Laser shock pressing of silver nanowires on flexible substrates to fabricate highly uniform transparent conductive electrode films, Nanotechnology, 32, 15, (2021)
[53]  
LEE J, LEE P, LEE H, Et al., Very long Ag nanowire synthesis and its application in a highly transparent, conductive and flexible metal electrode touch panel, Nanoscale, 4, 20, pp. 6408-6414, (2012)
[54]  
HENLEY S J, CANN M, JUREWICZ I, Et al., Laser patterning of transparent conductive metal nanowire coatings: Simulation and experiment, Nanoscale, 6, 2, pp. 946-952, (2014)
[55]  
SOPENA P, SERRA P, FERNANDEZ-PRADAS J M., Transparent and conductive silver nanowires networks printed by laser-induced forward transfer, Applied Surface Science, 476, pp. 828-833, (2019)
[56]  
TRAN N H, DUONG T H, KIM H C., A fast fabrication of copper nanowire transparent conductive electrodes by using pulsed laser irradiation, Scientific Reports, 7, 1, pp. 1-9, (2017)
[57]  
TRAN N H, HOANG H M, DUONG T H, Et al., Using a nanosecond laser to pattern copper nanowire-based flexible electrodes: From simulation to practical application, Applied Surface Science, 520, (2020)
[58]  
WANG J, CHEN H, ZHAO Y, Et al., Programmed ultrafast scan welding of Cu nanowire networks with a pulsed ultraviolet laser beam for transparent conductive electrodes and flexible circuits, ACS Applied Materials & Interfaces, 12, 31, pp. 35211-35221, (2020)
123456