Review of micro electro discharge machining process: parameters and feature perspective

被引：1
作者：
Kumar S. [1 ]
Dave H.K. [2 ]
Prajapati A.R. [2 ]
Rajpurohit S.R. [3 ]
机构：
[1] Department of Mechanical Engineering, M.A. National Institute of Technology, Bhopal
[2] Department of Mechanical Engineering, S.V. National Institute of Technology, Surat
[3] Intech Additive Solutions Private Limited, Bengaluru
来源：
International Journal of Machining and Machinability of Materials | 2024年 / 25卷 / 3-4期
关键词：
3D structure; ED drilling; ED milling; micro EDM; µ-EDM;
D O I：
10.1504/IJMMM.2023.136040
中图分类号：
学科分类号：
摘要：
A recent trend in the design and manufacturing industries is the development of miniaturised components or parts whose sizes are measured in microns. Micro electro discharge machining (μ-EDM) is one of the most promising technologies available for machining of micro components that can perform very precise and accurate machining operation. The quality of the product or cavities machined using μ-EDM process depends on the precisely selection of operating parameters. This article presents a review of μ-EDM process which comprises a brief introduction and its working principle, effect of process parameters and its applications in industries. Higher input of discharge energy significantly enhances the machining rate. However, it also affects the accuracy of cavity as well as tool wear adversely. μ-EDM process is predominantly reported as slow machining process that attracted good number of research concentrating to enhance the process capability by doing modification in machining system. Copyright © 2023 Inderscience Enterprises Ltd.
引用
收藏
页码：329 / 353
页数：24
相关论文
共 89 条
[1]  
Ali M.Y., Fabrication of microfluidic channel using micro end milling and micro electrical discharge milling, International Journal of Mechanical and Materials Engineering, 4, 1, pp. 93-97, (2009)
[2]  
Allen D.M., Lecheheb A., Micro electro-discharge machining of ink jet nozzles: optimum selection of material and machining parameters, Journal of Materials Processing Technology, 58, 1, pp. 53-66, (1997)
[3]  
Ay M., Caydas U., Hascalik A., Optimization of micro-EDM drilling of Inconel 718 superalloy, The International Journal of Advanced Manufacturing Technology, 66, 5–8, pp. 1015-1023, (2013)
[4]  
Azad M.S., Puri A.B., Simultaneous optimisation of multiple performance characteristics in micro-EDM drilling of titanium alloy, The International Journal of Advanced Manufacturing Technology, 61, 9–12, pp. 1231-1239, (2012)
[5]  
Bellotti M., Qian J., Reynaerts D., Enhancement of the micro-EDM process for drilling through-holes, Procedia CIRP, 68, 1, pp. 610-615, (2018)
[6]  
Bhosle R.B., Sharma S.B., Multi-performance optimization of micro-EDM drilling process of Inconel 600 alloy, Materials Today: Proceedings, 4, 2, pp. 1988-1997, (2017)
[7]  
Buttner H., Roth R., Wegener K., Limits of die-sinking EDM for micro structuring in W300 steel with pure copper electrodes, Procedia CIRP, 77, pp. 646-649, (2018)
[8]  
Chaides O., Ahuett-Garza H., Yi A.Y., Implementation of a microchannel manufacturing system based on micro-electro discharge machining, Ingeniería Mecánica, Tecnología y Desarrollo, 4, 6, pp. 229-238, (2014)
[9]  
Chauhan N.K., Das A.K., Rajesha S., Optimization of process parameters using grey relational analysis and Taguchi method during micro-EDMing, Materials Today: Proceedings, 5, 13, pp. 27178-27184, (2018)
[10]  
Chen S.T., Fabrication of high-density micro holes by upward batch micro EDM, Journal of Micromechanics and Microengineering, 18, 8, (2008)
123456789