Fault Line Selection and Location Method Based on Synchrophasor Measurement Unit for Distribution Network

被引：0

作者：

Deng F. ^{[1
]}

Li P. ^{[2
]}

Zeng X. ^{[1
]}

Yu L. ^{[2
,3
]}

Mao Y. ^{[1
]}

机构：

[1] College of Electrical and Information Engineering, Changsha University of Science & Technology, Changsha

[2] Digital Grid Research Institute of China Southern Power Grid, Guangzhou

[3] Electric Power Research Institute of China Southern Power Grid, Guangzhou

来源：

Dianli Xitong Zidonghua/Automation of Electric Power Systems | 2020年 / 44卷 / 19期

基金：

国家重点研发计划;

关键词：

Distribution network; Fault line selection; Fault location; Least square method; Synchrophasor measurement unit for distribution network (D-PMU); Traveling wave;

D O I：

10.7500/AEPS20190927001

中图分类号：

学科分类号：

摘要：

Single-phase grounding fault signal in distribution network is weak and is susceptible to noise interference. Therefore, it is very difficult to accurately select fault lines and locate faults. Therefore, a new method of fault line selection and location based on synchrophasor measurement units for distribution network (D-PMU) is proposed. Firstly, the function expansion module of D-PMU, namely acquisition module of fault traveling wave, is developed. The fault line selection and location system of distribution network is built, and the time characteristic matrix before and after the fault is constructed according to the time difference of traveling wave front in the whole distribution network. The least square method model is introduced to eliminate the calibration error of arrival time of traveling wave front. The variation characteristics of elements in time characteristic matrix before and after fault are analyzed, and the fault line selection and precise location of distribution network are realized. Simulation analysis and field test results show that D-PMU runs stably in the field, and the proposed method is immune to the influence of line parameters and network topology and is highly practical. © 2020 Automation of Electric Power Systems Press.

引用

页码：160 / 167

页数：7

共 20 条

[1]

FAN Shuxian, XU Bingyin, ZHANG Qingzhou, A new method for fault line selection in distribution system with arc suppression coil grounding with square-wave signal injection, Automation of Electric Power Systems, 36, 4, pp. 91-95, (2012)

[2]

DU Gang, LIU Xun, SU Gaofeng, Research on technology of grounding fault location combining FTU and "S" signal injecting method in distribution grid, Power System Protection and Control, 38, 12, pp. 73-76, (2010)

[3]

LIU Yugen, WANG Jiannan, MA Jinpei, Et al., Comprehensive fault line selection method for resonant grounded system combining wavelet packet transform with fifth harmonic method, High Voltage Engineering, 41, 5, pp. 1519-1525, (2015)

[4]

JIA Qingquan, ZHENG Xuran, LIU Chu, Et al., A method of fault section location in distribution networks based on fault direction measures, Proceedings of the CSEE, 37, 20, pp. 5933-5941, (2017)

[5]

NOORI M R, SHAHRTASH S M., Combined fault detector and faulted phase selector for transmission lines based on adaptive cumulative sum method, IEEE Transactions on Power Delivery, 28, 3, pp. 1779-1787, (2013)

[6]

XUE Yongduan, LI Juan, CHEN Xiaoru, Et al., Faulty feeder selection and transition resistance identification of high impedance fault in a resonant grounding system using transient signals, Proceedings of the CSEE, 37, 17, pp. 5037-5048, (2017)

[7]

HE Ruijiang, HU Zhijian, WANG Tianyi, A fault line selection method for resonant grounding system considering injected harmonics of distributed generation, Power System Technology, 43, 2, pp. 670-677, (2019)

[8]

SHU Hongchun, HUANG Haiyan, TIAN Xincui, Et al., Fault line selection in resonant earthed system based on morphological peak-valley detection, Automation of Electric Power Systems, 43, 1, pp. 228-233, (2019)

[9]

ABAD M, GARCIA-GRACIA M, ELHALABI N, Et al., Network impulse response based-on fault location method for fault location in power distribution systems, IET Generation, Transmission & Distribution, 10, 15, pp. 3962-3970, (2016)

[10]

JIANG Bo, DONG Xinzhou, SHI Shenxing, Et al., A method of adaptive time frequency window traveling wave based fault feeder selection, Proceedings of the CSEE, 35, 24, pp. 6387-6397, (2015)

← 1 2 →