Current deviation decoupling control based on sliding mode active disturbance rejection for PMLSM

被引：0

作者：

Zhao X. ^{[1
]}

Wu C. ^{[1
]}

机构：

[1] School of Electrical Engineering, Shenyang University of Technology, Shenyang

来源：

Guangxue Jingmi Gongcheng/Optics and Precision Engineering | 2022年 / 30卷 / 04期

关键词：

Current coupling; Current deviation decoupling control; Parameter variation; Permanent magnet linear synchronous motor; Robustness; Sliding mode active disturbance rejection control;

D O I：

10.37188/OPE.20223004.0431

中图分类号：

学科分类号：

摘要：

Current deviation decoupling control based on sliding mode active disturbance rejection (SADRC-CDDC) was designed for permanent magnet linear synchronous motors (PMLSMs), which were affected by current decoupling and parameter variation. The d-q axis cross-coupled branch was introduced at the difference point between the reference and actual currents. The current deviation decoupling controller (CDDC) was then designed by establishing the current control dynamics with the coupling term and calculating the coupling term for system compensation, which weakened the influence of the d-q axis current coupling. However, the decoupling value cannot be eliminated when the value of inductance varies. Therefore, the sliding mode active disturbance rejection controller (SADRC) was used to solve the disturbance caused by the parameter variation and to compensate for the system; thus, the system can realize approximately complete decoupling. From the theoretical analysis, the controller satisfied asymptotic stability, and the robustness of the system was verified. The effectiveness of the designed SADRC-CDDC scheme was proved by the system experiment result. Compared with CDDC, SADRC-CDDC can achieve a more robust performance as the maximum oscillation amplitude of the d-axis current is reduced by 34.88%-54.76%, and the maximum oscillation amplitude of the q-axis current is reduced by 47.83%-71.43% when the system is affected by current coupling and parameter variation. © 2022, Science Press. All right reserved.

引用

页码：431 / 441

页数：10

共 11 条

[1]

FU D X, ZHAO X M., Adaptive nonsingular fast terminal sliding mode control for permanent magnet linear synchronous motor, Transactions of China Electrotechnical Society, 35, 4, pp. 717-723, (2020)

[2]

ZHAO J W, GONG K G, ZHAO J, Et al., Position measurement for linear motor mover based on aperiodic sinusoidal stripe image, Opt. Precision Eng, 27, 4, pp. 889-900, (2019)

[3]

LI M, ZHAO J W, HU Y P, Et al., Current harmonic suppression of permanent magnet synchronous linear motor based on reduced-order double closed-loop ADRC, Opt. Precision Eng, 28, 5, pp. 1055-1065, (2020)

[4]

WANG R K, YU Z C, WANG J., Active compensation of contour error of X-Y linear motor precision motion platform, Opt. Precision Eng, 27, 7, pp. 1536-1543, (2019)

[5]

CHEN S Y, LIU T S., Intelligent tracking control of a PMLSM using self-evolving probabilistic fuzzy neural network, IET Electric Power Applications, 11, 6, pp. 1043-1054, (2017)

[6]

WANG S, FU J Y, YANG Y, Et al., An improved predictive functional control with minimum-order observer for speed control of permanent magnet synchronous motor, Journal of Electrical Engineering and Technology, 12, 1, pp. 272-283, (2017)

[7]

JIANG Y, ZHU Y, YANG K M, Et al., A data-driven iterative decoupling feedforward control strategy with application to an ultraprecision motion stage, IEEE Transactions on Industrial Electronics, 62, 1, pp. 620-627, (2015)

[8]

SI M., Research on current loop deviation decoupling control strategy of fermanent magnet synchronous motor, (2019)

[9]

WU W, DING X Z, YAN C Z., Research on control method of current loop decoupling based on complex vector, Proceedings of the CSEE, 37, 14, pp. 4184-4191, (2017)

[10]

LIU Y B, WANG X D, ZHOU K., Current deviation decoupling control with a sliding mode observer for permanent magnet synchronous motor, Transactions of China Electrotechnical Society, 35, 8, pp. 1642-1652, (2020)

← 1 2 →