Trajectory Planning of Double Pendulum Crane Considering Interval Uncertainty

被引:0
作者
Peng H. [1 ]
Shi B. [1 ]
Wang X. [1 ]
Xie X. [2 ]
Sun L. [2 ]
机构
[1] State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian
[2] School of Mechanical and Electric Engineering, Soochow University, Suzhou
来源
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2019年 / 55卷 / 02期
关键词
Crane; Interval uncertainty; Optimal control; Surrogate model; Trajectory planning;
D O I
10.3901/JME.2019.02.204
中图分类号
学科分类号
摘要
Uncertain factors make the crane deviate from the predetermined trajectory, which leads to serious security accidents. In order to investigate the impact of uncertainty on the crane movement in the stage of trajectory planning, an uncertain method based on interval model is proposed. Firstly, uncertainty is described by interval model and an uncertain trajectory planning problem in the forms of interval is established.Then,a symplectic pseudospectral methodis used to sample and Chebyshev surrogate model method (CSMM) is proposed to approximate the original trajectory planning. The uncertain interval results are obtained by scanning surrogate model. In numerical examples, the intervals of crane movement trajectory are obtained by the proposed method and the impact of uncertain level on crane movement trajectory is analyzed.Compared with other methods, the proposed method has characteristic of low computational cost and satisfactory accuracy.The intervals of crane movement trajectory under uncertainty can be obtained via the proposed method, the impact of uncertainty on crane movement is intuitively expressed,which offer the reference for stability and robustness of the crane system. © 2019 Journal of Mechanical Engineering.
引用
收藏
页码:204 / 213
页数:9
相关论文
共 18 条
[1]  
Vaughan J., Kim D., Singhose W., Control of tower cranes with double-pendulum payload dynamics, IEEE Transactions on Control Systems Technology, 18, 6, pp. 1345-1358, (2010)
[2]  
Liu Y., Yu H., A survey of underactuated mechanical systems, IET Control Theory & Application, 7, 7, pp. 921-935, (2013)
[3]  
Fang Y., Ma B., Wang P., Et al., A motion planning-based adaptive control method for an underactuated crane system, IEEE Transactions on Control Systems Technology, 20, 1, pp. 241-248, (2012)
[4]  
Abdel-Rarman E., Nayfeh A.H., Masoud Z.N., Dynamics and control of cranes: a review, Journal of Vibration and Control, 9, 7, pp. 863-908, (2003)
[5]  
Shi X., Zhang F., Qu X., Et al., Position and attitude measurement and online errors compensation for KUKA industrial robots, Journal of Mechanical Engineering, 53, 8, pp. 1-7, (2017)
[6]  
Zhang X., Fang Y., Sun N., Minimum-time trajectory planning for underactuated overhead crane systems with state and control constraints, IEEE Transactions on Industrial Electronic, 61, 12, pp. 6915-6925, (2014)
[7]  
Wu Z., Xia X., Optimal motion planning for overhead cranes, IET Control Theory & Application, 8, 17, pp. 1833-1842, (2014)
[8]  
Sun N., Fang Y., Qian Y., Motion planning for cranes with double pendulum effects subject to state constraints, Control Theory & Applications, 31, 7, pp. 974-980, (2014)
[9]  
Chen H., Fang Y., Sun N., Et al., Pseudospectral method based time optimal anti-swing trajectory planning for double pendulum crane systems, Acta Automatica Sinica, 42, 1, pp. 153-160, (2016)
[10]  
Wu Z., Xia X., Energy efficiency of overhead cranes, Proceedings of the 19th World Congress-The International Federation of Automatic Control, pp. 19-24, (2014)