Sustainable use of silica fume and metakaolin in slag/fly ash-based self-compacting geopolymer composites: Fresh, physico-mechanical and durability properties

被引:32
作者
Arslan, Sumeyye [1 ]
Oz, Ali [2 ]
Benli, Ahmet [3 ]
Bayrak, Baris [4 ]
Kaplan, Gokhan [1 ]
Aydin, Abdulkadir Cuneyt [1 ]
机构
[1] Ataturk Univ, Civil Engn Dept, TR-25030 Erzurum, Turkiye
[2] Ataturk Univ, Narman Vocat Sch, TR-25530 Erzurum, Turkiye
[3] Bingol Univ, Civil Engn Dept, TR-12100 Bingol, Turkiye
[4] Kafkas Univ, Dept Civil Engn, TR-36150 Kars, Turkiye
关键词
Self -compacting geopolymer composite; Sodium hydroxide/sodium silicate ratio; Curing temperature; Durability; FLY-ASH; COMPRESSIVE STRENGTH; MECHANICAL-PROPERTIES; CONCRETE; MORTARS; SODIUM; CEMENT; MICROSTRUCTURE; WORKABILITY; PERFORMANCE;
D O I
10.1016/j.scp.2024.101512
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Self -compacting geopolymer concrete is a new technology in the construction industry that prevents workers from compaction operations on materials with highly concentrated alkaline liquid. The assessment of the fresh, mechanical, durability and microstructural properties of slag/fly ash -based self -compacting geopolymer composites (SCGC) with silica fume (SF) and metakaolin (MK) is the main objective of this study. Granulated blast furnace slag (GBFS), fly ash (FA), SF and MK were used as precursors in the synthesis of SCGC. Sodium silicate (SS) and sodium hydroxide (SH) solution was used as activators. Ten mixtures were created; five of them had 85% GBFS, 10% SF and 5%MK while the other five contained 85% FA, 10% SF and 5%MK. The effect of five different SS/SH values varying from 2.0 to 3.0 and curing temperature on the fresh, mechanical and durability properties of SCGC mixtures were investigated. The performance of the generated blends at high temperatures, and sulfate attack was also evaluated. Microstructure analyses were also performed by using scanning electron microscopy (SEM) images. The findings showed that the GBFS based SCGC mixture activated with SS/SH value of 2.25 produced a compressive strength of 83 MPa at 1 -day heat curing at 80 degrees C then 28 -day water curing. The results demonstrated that the FA -based SCGC mixture activated with a 2.75 SS/SH value yielded a compressive strength of 40 MPa after a 1 -day heat cure at 80 degrees C. The results showed that GBFS/FAbased SCGC mixtures exhibited best durability resistance at SS/SH value of 3.0 when exposed to high temperature and sulfate attack.
引用
收藏
页数:20
相关论文
共 84 条
[1]   Flexural strength and failure of geopolymer concrete beams reinforced with carbon fibre-reinforced polymer bars [J].
Ahmed, Hemn Qader ;
Jaf, Dilshad Kakasor ;
Yaseen, Sinan Abdulkhaleq .
CONSTRUCTION AND BUILDING MATERIALS, 2020, 231
[2]   Effect of slag, silica fume, and metakaolin on properties and performance of alkali-activated fly ash cured at ambient temperature [J].
Alanazi, Hani ;
Hu, Jiong ;
Kim, Yong-Rak .
CONSTRUCTION AND BUILDING MATERIALS, 2019, 197 :747-756
[3]   Setting Time, Microstructure, and Durability Properties of Low Calcium Fly Ash/Slag Geopolymer: A Review [J].
Aldawsari, Salem ;
Kampmann, Raphael ;
Harnisch, Joerg ;
Rohde, Catharina .
MATERIALS, 2022, 15 (03)
[4]   Effect of cement addition, solution resting time and curing characteristics on fly ash based geopolymer concrete performance [J].
Aliabdo, Ali A. ;
Abd Elmoaty, Abd Elmoaty M. ;
Salem, Hazem A. .
CONSTRUCTION AND BUILDING MATERIALS, 2016, 123 :581-593
[5]   Microstructure investigation, strength assessment, and thermal modelling of concrete exposed to different heating cooling regimes [J].
Anand, N. ;
Thanaraj, Daniel Paul ;
Andrushia, Diana ;
Lubloy, Eva Eszter ;
Kiran, Tattukolla ;
Kanagaraj, Balamurali ;
Kodur, Venkatesh .
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2023, 148 (09) :3221-3247
[6]  
[Anonymous], ASTM International, ASTM C109 ASTM C109, P2020, DOI [DOI 10.1520/C0109_C0109M-20, DOI 10.1520/C0109_C0109M-20B]
[7]  
[Anonymous], 2013, ASTM C 642-06
[8]   Effect of high temperature on the performance of self-compacting mortars produced with calcined kaolin and metakaolin [J].
Arslan, Furkan ;
Benli, Ahmet ;
Karatas, Mehmet .
CONSTRUCTION AND BUILDING MATERIALS, 2020, 256
[9]  
ASTM, 2019, ASTM C348
[10]  
ASTM, 2020, ASTM C1585-20