Analytical analysis and performance characterization of brushless doubly fed induction machines based on general air-gap field modulation theory

被引：18

作者：

Han P. ^{[1
]}

Cheng M. ^{[2
]}

Zhu X. ^{[3
]}

Chen Z. ^{[4
]}

机构：

[1] Ansys Inc., San Jose, 95134, CA

[2] School of Electrical Engineering, Southeast University, Nanjing

[3] Department of Electrical Engineering, North China Electric Power University, Baoding

[4] Department of Energy Technology, Aalborg University, Aalborg

来源：

Han, Peng (peng.han@uky.edu) | 1600年 / Institute of Electrical and Electronics Engineers Inc.卷 / 07期

关键词：

AC machines; air gap; frequency domain; magnetic field; modulation; rotor windings; spatial harmonic;

D O I：

10.23919/CJEE.2021.000021

中图分类号：

学科分类号：

摘要：

Air-gap magnetic field modulation has been widely observed in electric machines. In this study, we present an analytical analysis and performance characterization of brushless doubly fed induction machines (BDFIMs) fed by two independent converters from the perspective of air-gap field modulation. The spiral-loop winding is studied in detail as an example to show the generalized workflow that can also be used to analyze other short-circuited rotor winding types, such as nested-loop and multiphase double-layer windings. Magnetic field conversion factors are introduced to characterize the modulation behavior of special rotor windings and facilitate their comparison in terms of cross-coupling capability, average torque, and harmonic content of the air-gap flux density waveforms. The stator magnetomotive force (MMF), rotor MMF, and resultant air-gap MMF are considered, based on which the closed-form inductance formulas are derived, and the torque equation is obtained along with the optimal current angle for maximum torque operation by using the virtual work principle. The design equations are then developed for the initial sizing and geometry scaling of the BDFIMs. Transient finite element analysis and experimental measurements are performed to validate the analysis. © 2017 CMP.

引用

页码：4 / 19

页数：15

共 26 条

[1]

Cheng M., Zhu Y., The state of the art of wind energy conversion systems and technologies: A review, Energy Convers. Manag., 88, pp. 332-347, (2014)

[2]

Li H., Chen Z., Overview of different wind generator systems and their comparisons, IET Renew. Power Gen., 2, 2, pp. 123-138, (2008)

[3]

Xu L., Liu Y., Wen X., Comparison study of singly-fed electric machine with doubly-fed machine for EV/HEV applications, Proc. Int. Conf. Electr. Mach. Syst. (ICEMS), (2011)

[4]

Banerjee A., Tomovich M.S., Leeb S.B., Et al., Power converter sizing for a switched doubly fed machine propulsion drive, IEEE Trans. Ind. Appl., 51, 1, pp. 248-258, (2015)

[5]

Han P., Cheng M., Chen Z., Dual-electrical-port control of cascaded doubly-fed induction machine for EV/HEV applications, IEEE Trans. Ind. Appl., 53, 2, pp. 1390-1398, (2017)

[6]

Rebeiro R.S., Knight A.M., Two-converters-based synchronous operation and control of a brushless doubly fed reluctance machine, IEEE Trans. Magn., 54, 11, (2018)

[7]

Han P., Cheng M., Ademi S., Et al., Brushless doubly-fed machines: Opportunities and challenges, Chinese Journal of Electrical Engineering, 4, 2, pp. 1-17, (2018)

[8]

Roberts P.C., Long T., McMahon R.A., Et al., Dynamic modelling of the brushless doubly fed machine, IET Electr. Power Appl., 7, 7, pp. 544-556, (2013)

[9]

Ferreira A.C., Williamson S., Time-stepping finite-element analysis of brushless doubly fed machine taking iron loss and saturation into account, IEEE Trans. Ind. Appl., 35, 3, pp. 583-588, (1999)

[10]

Gorginpour H., Oraee H., McMahon R.A., Performance description of brushless doubly-fed induction machine in its asynchronous and variable speed synchronous modes, J. Electromag. Anal. Appl., 2011, 3, pp. 490-511

← 1 2 3 →