Three-dimensional (3D) synthetic printing for the manufacture of non-biodegradable models, tools and implants used in surgery: a review of current methods

被引：9

作者：

Kirby B. ^{[1
]}

Kenkel J.M. ^{[2
]}

Zhang A.Y. ^{[2
]}

Amirlak B. ^{[2
]}

Suszynski T.M. ^{[2
]}

机构：

[1] Department of Surgery, University of Missouri Health Care, Columbia, MO

[2] Department of Plastic Surgery, University of Texas Southwestern Medical Center, Dallas, TX

来源：

Journal of Medical Engineering and Technology | 2021年 / 45卷 / 01期

关键词：

3D printing; additive manufacturing; subtractive manufacturing; three-dimensional printing;

D O I：

10.1080/03091902.2020.1838643

中图分类号：

学科分类号：

摘要：

The advent of three-dimensional (3D) printing in the 1980s ushered in a new era of manufacturing. Original 3D printers were large, expensive and difficult to operate, but recent advances in 3D printer technologies have drastically increased the accessibility of these machines such that individual surgical departments can now afford their own 3D printers. As adoption of 3D printing technology has increased within the medical industry so too has the number of 3D printable materials. Selection of the appropriate printer and material for a given application can be a daunting task for any clinician. This review seeks to describe the benefits and drawbacks of different 3D printing technologies and the materials used therein. Commercially available printers using fused deposition modelling or fused filament fabrication technology and relatively inexpensive thermoplastic materials have enabled rapid manufacture of anatomic models and intraoperative tools as well as implant prototyping. Titanium alloys remain the gold-standard material for various implants used in the fixation of craniofacial or extremity fractures, but polymers and ceramics are showing increasing promise for these types of applications. An understanding of these materials and their compatibility with various 3D printers is essential for application of this technology in a healthcare setting. © 2020 Informa UK Limited, trading as Taylor & Francis Group.

引用

页码：14 / 21

页数：7

共 64 条

[1]

(2017)

[2]

Largo R.D., Garvey P.B., Updates in head and neck reconstruction, Plast Reconstr Surg, 141, 2, pp. 271e-285e, (2018)

[3]

Schubert C., van Langeveld M.C., Donoso L.A., Innovations in 3D printing: a 3D overview from optics to organs, Br J Ophthalmol, 98, 2, pp. 159-161, (2014)

[4]

Ventola C.L., Medical applications for 3D printing: current and projected uses, P T, 39, 10, pp. 704-711, (2014)

[5]

Hoy M.B., 3D printing: making things at the library, Med Ref Serv Q, 32, 1, pp. 94-99, (2013)

[6]

Pham D.T., Gault R.S., A comparison of rapid prototyping technologies, Int J Mach Tools Manuf, 38, 10-11, pp. 1257-1287, (1998)

[7]

Gibson I., Rosen D.W., Stucker B., Additive manufacturing technologies: 3D printing, rapid prototyping and direct digital manufacturing, (2015)

[8]

Chae M.P., Rozen W.M., McMenamin P.G., Et al., Emerging applications of bedside 3D printing in plastic surgery, Front Surg, 2, (2015)

[9]

Marine Core-Baillais H.B., Richardot A., Kusnadi H., (2017)

[10]

Ligon S.C., Liska R., Stampfl J., Et al., Polymers for 3D printing and customized additive manufacturing, Chem Rev, 117, 15, pp. 10212-10290, (2017)

← 1 2 3 4 5 6 7 →