Heat curing as a means of postprocessing influence on 3D printed mortar specimens in powderbased 3D printing

被引：0
作者：
Shakor, Pshtiwan [1 ]
Nejadi, Shami [1 ]
Paul, Gavin [2 ]
Sanjayan, Jay [3 ,4 ]
Aslani, Farhad [5 ]
机构：
[1] School of Civil and Environmental Engineering, University of Technology Sydney, Australia
[2] School of Mechanical and Mechatronic Engineering, Australia
[3] Centre for Smart Infrastructure and Digital Construction, Australia
[4] Swinburne University of Technology, Melbourne, Australia
[5] School of Engineering, The University of Western Australia, Australia
来源：
Indian Concrete Journal | 2019年 / 93卷 / 09期
关键词：
Mortar;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：65 / 74
相关论文
共 50 条
  • [41] Development of a novel 3D construction printer for consistent buildability of novel geopolymer mortar and its challenges
    Ali, Md. Hazrat
    Abilgaziyev, Anuar
    Temirzakuly, Bakbergen
    Kurokawa, Syuhei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025, 136 (3-4) : 1791 - 1804
  • [42] Comparison of physical and physicochemical methods for 3D printing application with the focus on the unconfined uniaxial compression test
    Pott, Ursula
    Jakob, Cordula
    Wolf, Julian
    Stephan, Dietmar
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 395
  • [43] 3D concrete printing with cement-coated recycled crumb rubber: Compressive and microstructural properties
    Liu, Junli
    Setunge, Sujeeva
    Tran, Phuong
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 347
  • [44] Sustainable use of ultrafine recycled glass in additive manufactured (3D printed) reactive powder concrete
    Zhou, Yiyi
    Luo, Haoran
    Anand, Kamal
    Singh, Amardeep
    Xie, Yi Min
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 419
  • [45] Interpretable machine learning for predicting the strength of 3D printed fiber-reinforced concrete (3DP-FRC)
    Uddin, Md Nasir
    Ye, Junhong
    Deng, Boyu
    Li, Ling-zhi
    Yu, Kequan
    JOURNAL OF BUILDING ENGINEERING, 2023, 72
  • [46] A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing
    Chen, Hao
    Zhang, Daobo
    Chen, Peng
    Li, Ning
    Perrot, Arnaud
    MATERIALS, 2023, 16 (07)
  • [47] Exploring fibre addition methods and mechanical properties of fibre-reinforced 3D printed concrete: A review
    Warsi, Syed Bustan Fatima
    Panda, Biranchi
    Biswas, Pankaj
    DEVELOPMENTS IN THE BUILT ENVIRONMENT, 2023, 16
  • [48] Effects of carbonated recycled sand on the interfacial bonding performance of 3D printed cement-based material
    Luo, Surong
    Li, Wenqiang
    Cai, Yili
    Zhang, Kaijian
    JOURNAL OF BUILDING ENGINEERING, 2025, 99
  • [49] Flexural behaviour of cementitious composites embedded with 3D printed re-entrant chiral auxetic meshes
    Zahra, Tatheer
    Asad, Mohammad
    Thamboo, Julian
    SMART MATERIALS AND STRUCTURES, 2024, 33 (02)
  • [50] Effects of bentonite, diatomite and metakaolin on the rheological behavior of 3D printed magnesium potassium phosphate cement composites
    Zhao, Zhihui
    Chen, Mingxu
    Zhong, Xu
    Huang, Yongbo
    Yang, Lei
    Zhao, Piqi
    Wang, Shoude
    Lu, Lingchao
    Cheng, Xin
    ADDITIVE MANUFACTURING, 2021, 46
12345