Heat curing as a means of postprocessing influence on 3D printed mortar specimens in powderbased 3D printing

被引：0
|
作者：
Shakor, Pshtiwan [1 ]
Nejadi, Shami [1 ]
Paul, Gavin [2 ]
Sanjayan, Jay [3 ,4 ]
Aslani, Farhad [5 ]
机构：
[1] School of Civil and Environmental Engineering, University of Technology Sydney, Australia
[2] School of Mechanical and Mechatronic Engineering, Australia
[3] Centre for Smart Infrastructure and Digital Construction, Australia
[4] Swinburne University of Technology, Melbourne, Australia
[5] School of Engineering, The University of Western Australia, Australia
来源：
Indian Concrete Journal | 2019年 / 93卷 / 09期
关键词：
Mortar;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：65 / 74
相关论文
共 50 条
  • [1] Influence of printing direction on 3D printed ABS specimens
    Markiz, Nassim
    Horvath, Eszter
    Ficzere, Peter
    PRODUCTION ENGINEERING ARCHIVES, 2020, 26 (03) : 127 - 130
  • [2] Durability of 3D Printed Concrete: A Comparison of Extrusion 3D Printing, Shotcrete 3D Printing and Conventional Casting
    Boehler, David
    Mai, Inka
    Lowke, Dirk
    FOURTH RILEM INTERNATIONAL CONFERENCE ON CONCRETE AND DIGITAL FABRICATION, DC 2024, 2024, 53 : 283 - 290
  • [3] Analyzing the Influence of Multimaterial 3D Printing and Postprocessing on Mechanical and Tribological Characteristics
    Yilmaz, Sinan
    Gul, Okan
    Eyri, Busra
    Karsli, N. Gamze
    Yilmaz, Taner
    MACROMOLECULAR MATERIALS AND ENGINEERING, 2024, 309 (05)
  • [4] Properties of 3D Printing Mortar with the Development of a 3D Construction Printing (3DCP) Delivery System
    Verian, Kho P.
    Kowaleski, Scott R.
    Carli, Matthew D.
    Bright, Randall P.
    Maandi, Eerik
    Sill, Gary
    TRANSPORTATION RESEARCH RECORD, 2020, 2674 (02) : 1 - 9
  • [5] Influence of nanoclay on the fresh and rheological behaviour of 3D printing mortar
    Kaushik, Sandipan
    Sonebi, Mohammed
    Amato, Giuseppina
    Perrot, Arnaud
    Das, Utpal Kumar
    MATERIALS TODAY-PROCEEDINGS, 2022, 58 : 1063 - 1068
  • [6] Influence of Polymer on Rheological Properties of 3D Printing Building Mortar
    Liu Q.
    Yang Q.
    Jianzhu Cailiao Xuebao/Journal of Building Materials, 2020, 23 (05): : 1206 - 1211
  • [7] 3D Printing of Anatomic Pathology Specimens
    Mahmoud, A.
    Bennett, M. W.
    LABORATORY INVESTIGATION, 2014, 94 : 148A - 148A
  • [8] 3D Printing of Anatomic Pathology Specimens
    Mahmoud, A.
    Bennett, M. W.
    MODERN PATHOLOGY, 2014, 27 : 148A - 148A
  • [9] 3D Printed Silicone Meniscus Implants: Influence of the 3D Printing Process on Properties of Silicone Implants
    Luis, Eric
    Pan, Houwen Matthew
    Bastola, Anil Kumar
    Bajpai, Ram
    Sing, Swee Leong
    Song, Juha
    Yeong, Wai Yee
    POLYMERS, 2020, 12 (09)
  • [10] A Study of Linear Heat Transfer Gradients on 3D Printed Specimens
    Benham, Robert
    Rehman, Fayyaz
    ADVANCES IN MANUFACTURING TECHNOLOGY XXX, 2016, 3 : 137 - 142
12345