Investigation of structural, electrical, and magnetic variations of Ni-Zn-Co ferrites by substituting rare earth Ho3+ for high-frequency applications

The investigation of structural, magnetic, and electrical properties of Ni0.6Zn0.3Co0.1HoxFe2-xO4 (NZCHF, 0 <= x <= 0.2) ferrites, synthesized through the sol-gel autocombustion method, has been undertaken. The refined x-ray diffraction (XRD) analysis was performed for XRD data analysis using Fullprof Suite software and it confirmed a single-phase cubic spinel structure, with the determination of crystallite size, refinement parameters and lattice constants. The bulk density of the samples consistently remained lower than the x-ray density, with densities increasing proportionally to the enhancement of Ho concentration. FTIR analysis corroborated the presence of metal-oxygen bonds within the ferrite possessing a spinel cubic structure. Fe-57 Mossbauer spectroscopy showed that the hyperfine magnetic field of tetrahedral (A) and octahedral (B) sites decreased with the substitution of Ho3+ ions that preferentially occupy the B site. The impedance analyzer and vibrating sample magnetometer (VSM) were utilized to measure the real and imaginary parts of the complex permeability and magnetic properties of the samples, respectively. Complex impedance plots were scrutinized to discern the contributions of grain and grain boundary resistances, providing insights into the electrical behavior of the ferrite samples. Furthermore, the introduction of Ho concentration led to alterations in other key properties of the ferrites, including coercivity (H-c), retentivity (M-r), anisotropy constant (K), and magnetic moment (mu(B)).The impact of the rare-earth content on the magnetic features of the prepared NiZnCo ferrite microspheres was investigated by analyzing magnetic-hysteresis (M-H) loops, which showed soft ferrimagnetism. Concurrently, the dielectric constant and dielectric loss tangent of the studied samples exhibited a decrease with the rise in Ho3+ concentration. The expected reduction in tan loss in the prepared samples is attributed to the increase in ac resistivity associated with the higher Ho3+ content.