Distribution characteristics and migration pathways of metals during hydrothermal liquefaction of municipal sewage sludge in the presence of various catalysts

A series of hydrothermal liquefaction (HTL) experiments with two different samples of municipal sewage sludge (MSS) were conducted at 350 degrees C for 30 min residence time in a high pressure batch reactor. The main aim of the study was to explore the distribution and migration pathways of a broad range of metals and metalloids in the HTL products (bio-oil, char and aqueous phase) obtained in the presence of various homogeneous and heterogeneous catalysts (Na2CO3, Li2CO3, K2CO3, Ba(OH)2, Fe2O3, CeO2, NiMo/MoO3, MoS2, Ni/NiO, SnO2, FeS). The elements under study included 16 environmentally significant metals and metalloids (As, B, Ba, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Se, Sn, Zn and Hg). The study showed that the quantitative migration of the tested metals and metalloids to the particular HTL products, relative to their initial content in the raw sludge, is different for the individual elements. Most metals exhibited a particularly strong affinity to the solid fraction (biochar). In the obtained HTL bio-oils, all tested elements were identified, except of Cd. It was also found that B and As have high affinity to the aqueous phase. A direct effect of catalysts on the contents of some elements in the products was also proved by the study, e.g. increased concentration of Cr in the biochar when Fe2O3 was used as a process catalyst. Due to the wide scope of the tested elements and broad range of catalyst used, the results obtained represent a unique and comprehensive set of environmental data compared to similar HTL studies previously conducted for MSS.