The effect of fullerene soot on polymer-metal adhesion in thermoplastic fiber metal laminates

被引：0
作者：
Kobykhno, Ilya [1 ]
Honcharenko, Dmytro [1 ]
Stolyarov, Oleg [1 ]
Vaganov, Gleb [1 ,2 ]
Tolochko, Oleg [1 ,3 ]
机构：
[1] Peter Great St Petersburg Polytech Univ, Polytech Skaya 29, St Petersburg 195251, Russia
[2] Inst Macromol Cpds, Bolshoy Pr 31, St Petersburg 199004, Russia
[3] State Marine Tech Univ, St Petersburg 190121, Russia
来源：
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES | 2024年 / 132卷
关键词：
Fiber metal laminate; Composite materials; Nanocomposite; Fullerene soot; Mechanical properties; Adhesion; WALLED CARBON NANOTUBES; BASALT FIBER; SURFACE TREATMENTS; IMPACT BEHAVIOR; MECHANICAL-BEHAVIOR; COMPOSITES; GRAPHENE; VELOCITY; TITANIUM; NANOCOMPOSITES;
D O I：
10.1016/j.ijadhadh.2024.103680
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
The paper investigated the effect of fullerene soot (FS) additions into amorphous polysulfone (PSU) on its mechanical properties, adhesion to the pretreated surface of an aluminum alloy, and on the flexural properties of a PSU-based fiber metal laminate (FML). It was shown that even small additions of FS have a negative effect on polymer mechanical properties: a decrease in tensile strength and elongation to break; and the addition of more than 1% of FS led to the brittle fracture of PSU. At the same time, the addition of 0.5 -1.0% FS increased adhesion between Al and PSU by 60 -70%. Finally, it was shown that the use of PSU films filled with fullerene soot as an adhesive layer in an FML increases its flexural strength by 12% and elastic modulus by 20%.
引用
收藏
页数：8
相关论文
共 46 条
[1]   Effects of various aluminum surface treatments on the basalt fiber metal laminates interlaminar adhesion [J].
Aghamohammadi, Hamed ;
Abbandanak, S. Navid Hosseini ;
Eslami-Farsani, Reza ;
Siadati, S. M. Hossein .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2018, 84 :184-193
[2]   Experimental analysis on the single -lap joints bonded by a nanocomposite adhesives which obtained by adding nanostructures [J].
Akpinar, Idal Avinc ;
Gultekin, Kursat ;
Akpinar, Salih ;
Akbulut, Hamit ;
Ozel, Adnan .
COMPOSITES PART B-ENGINEERING, 2017, 110 :420-428
[3]   A novel copper-matrix composite with fullerene soot nanoparticles produced by molecular level mixing [J].
Bobrynina, Elizaveta, V ;
Larionova, Tatiana, V ;
Koltsova, Tatiana S. ;
Shamshurin, Aleksey, I ;
Tolochko, Oleg, V .
MATERIALS LETTERS, 2021, 304
[4]   Multiscale fiber-reinforced thermoplastic composites incorporating carbon nanotubes: A review [J].
Diez-Pascual, Ana M. ;
Naffakh, Mohammed ;
Marco, Carlos ;
Gomez-Fatou, Marian A. ;
Ellis, Gary J. .
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 2014, 18 (02) :62-80
[5]   Recent trend in developing advanced fiber metal laminates reinforced with nanoparticles: A review study [J].
Eslami-Farsani, Reza ;
Aghamohammadi, Hamed ;
Khalili, S. Mohammad Reza ;
Ebrahimnezhad-Khaljiri, Hossein ;
Jalali, Hamid .
JOURNAL OF INDUSTRIAL TEXTILES, 2022, 51 (5_SUPPL) :7374S-7408S
[6]   An experimental investigation on the effect of incorporating graphene nanoplatelets on the low-velocity impact behavior of fiber metal laminates [J].
Fathi, Azadeh ;
Liaghat, Gholamhossein ;
Sabouri, Hadi .
THIN-WALLED STRUCTURES, 2021, 167
[7]   Low velocity impact response of basalt-aluminium fibre metal laminates [J].
Ferrante, L. ;
Sarasini, F. ;
Tirillo, J. ;
Lampani, L. ;
Valente, T. ;
Gaudenzi, P. .
MATERIALS & DESIGN, 2016, 98 :98-107
[8]   A review on basalt fibre and its composites [J].
Fiore, V. ;
Scalici, T. ;
Di Bella, G. ;
Valenza, A. .
COMPOSITES PART B-ENGINEERING, 2015, 74 :74-94
[9]  
Gnedin DA, 2009, A device for impregnating tape material, Patent No. [2364505C1, 2364505]
[10]   Interfacial shear strength of a glass fiber/epoxy bonding in composites modified with carbon nanotubes [J].
Godara, A. ;
Gorbatikh, L. ;
Kalinka, G. ;
Warrier, A. ;
Rochez, O. ;
Mezzo, L. ;
Luizi, F. ;
van Vuure, A. W. ;
Lomov, S. V. ;
Verpoest, I. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2010, 70 (09) :1346-1352
12345