The Effects of Gas Composition on the Atmospheric Pressure Plasma Jet Modification of Polyethylene Films

被引:0
|
作者
孙洁 [1 ]
邱夷平 [2 ]
机构
[1] Department of Textile Engineering,College of Textiles and Clothing,Jiangnan University
[2] Department of Textile Materials Science and Product Design,College of Textiles,Donghua
关键词
D O I
暂无
中图分类号
O53 [等离子体物理学];
学科分类号
070204 ;
摘要
Polyethylene(PE) films are treated using an atmospheric pressure plasma jet(APPJ) with He or He/O2 gas for different periods of time.The influence of gas type on the plasma-polymer interactions is studied.The surface contact angle of the PE film can be effectively lowered to 58° after 20 s of He/O2 plasma treatment and then remains almost unchanged for longer treatment durations,while,for He plasma treatment,the film surface contact angle drops gradually to 47° when the time reaches 120 s.Atomic force microscopy(AFM) results show that the root mean square(RMS) roughness was significantly higher for the He/O2 plasma treated samples than for the He plasma treated counterparts,and the surface topography of the He/O2plasma treated PE films displays evenly distributed dome-shaped small protuberances.Chemical composition analysis reveals that the He plasma treated samples have a higher oxygen content but a clearly lower percentage of-COO than the comparable He/O2 treated samples,suggesting that differences exist in the mode of incorporating oxygen between the two gas condition plasma treatments.Electron spin resonance(ESR) results show that the free radical concentrations of the He plasma treated samples were clearly higher than those of the He/O2 plasma treated ones with other conditions unchanged.
引用
收藏
页码:402 / 408
页数:7
相关论文
共 50 条
  • [1] The Effects of Gas Composition on the Atmospheric Pressure Plasma Jet Modification of Polyethylene Films
    Sun Jie
    Qiu Yiping
    PLASMA SCIENCE & TECHNOLOGY, 2015, 17 (05) : 402 - 408
  • [2] The Effects of Gas Composition on the Atmospheric Pressure Plasma Jet Modification of Polyethylene Films
    孙洁
    邱夷平
    Plasma Science and Technology, 2015, 17 (05) : 402 - 408
  • [3] Surface modification of polyethylene in an argon atmospheric pressure plasma jet
    Van Deynse, A.
    Cools, P.
    Leys, C.
    Morent, R.
    De Geyter, N.
    SURFACE & COATINGS TECHNOLOGY, 2015, 276 : 384 - 390
  • [4] Surface modification of ultra high modulus polyethylene fibers by an atmospheric pressure plasma jet
    Wang, T.
    Wang, C.
    Qiu, Y.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 108 (01) : 25 - 33
  • [5] Influence of water addition on the modification of polyethylene surface by nitrogen atmospheric pressure plasma jet
    Liu, X.
    Wang, G.
    Liu, J.
    Zhang, J.
    Liu, S.
    Wang, C.
    Yang, Z.
    Sun, J.
    Song, J.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2019, 136 (09)
  • [6] Chemical Composition of SiOx Films Deposited by an Atmospheric Pressure Plasma Jet (APPJ)
    Schaefer, Jan
    Foest, Ruediger
    Quade, Antje
    Ohl, Andreas
    Weltmann, Klaus-Dieter
    PLASMA PROCESSES AND POLYMERS, 2009, 6 : S519 - S524
  • [7] Surface modification of polyethylene using argon and argon/methane DBD atmospheric pressure plasma jet
    Bedrouni, F.
    Ouchabane, M.
    Almabouada, F.
    Saidi-Amroun, N.
    PHYSICA SCRIPTA, 2023, 98 (08)
  • [8] Effects of sheath gas flow on He atmospheric pressure plasma jet
    Ogawa, Kotaro
    Yajima, Hideki
    Oh, Jun-Seok
    Furuta, Hiroshi
    Hatta, Akimitsu
    APPLIED PHYSICS EXPRESS, 2019, 12 (03)
  • [9] SURFACE MODIFICATION OF HIGH DENSITY POLYETHYLENE AND POLYCARBONATE BY ATMOSPHERIC PRESSURE COLD ARGON/OXYGEN PLASMA JET
    Shrestha, R.
    Gurung, J. P.
    Shrestha, A.
    Subedi, D. P.
    PLASMA AND FUSION SCIENCE: FROM FUNDAMENTAL RESEARCH TO TECHNOLOGICAL APPLICATIONS, 2018, : 397 - 405
  • [10] Surface Modification of Polyethylene (PE) Films Using Dielectric Barrier Discharge Plasma at Atmospheric Pressure
    王坤
    李建
    任春生
    王德真
    王友年
    Plasma Science and Technology, 2008, (04) : 433 - 437