Effect of discrete fibre reinforcement on soil tensile strength

被引:1
|
作者
Jian Li [1 ]
Chaosheng Tang [1 ,2 ]
Deying Wang [1 ]
Xiangjun Pei [2 ]
Bin Shi [1 ]
机构
[1] School of Earth Sciences and Engineering,Nanjing University
[2] Key Laboratory of Geohazard Prevention and Geoenvironment Protection,Chengdu University of Technology
基金
中国国家自然科学基金;
关键词
Fibre reinforced soil; Tensile strength; Direct tensile test; Fibre content; Dry density; Water content;
D O I
暂无
中图分类号
TU443 [膨胀性土与地基];
学科分类号
081401 ;
摘要
The tensile behaviour of soil plays a significantly important role in various engineering applications.Compacted soils used in geotechnical constructions such as dams and clayey liners in waste containment facilities can suffer from cracking due to tensile failure.In order to increase soil tensile strength,discrete fibre reinforcement technique was proposed.An innovative tensile apparatus was developed to determine the tensile strength characteristics of fibre reinforced soil.The effects of fibre content,dry density and water content on the tensile strength were studied.The results indicate that the developed test apparatus was applicable in determining tensile strength of soils.Fibre inclusion can significantly increase soil tensile strength and soil tensile failure ductility.The tensile strength basically increases with increasing fibre content.As the fibre content increases from 0%to 0.2%,the tensile strength increases by65.7%.The tensile strength of fibre reinforced soil increases with increasing dry density and decreases with decreasing water content.For instance,the tensile strength at a dry density of 1.7 Mg/m3is 2.8times higher than that at 1.4 Mg/m3.It decreases by 30%as the water content increases from 14.5%to20.5%.Furthermore,it is observed that the tensile strength of fibre reinforced soil is dominated by fibre pull-out resistance,depending on the interfacial mechanical interaction between fibre surface and soil matrix.
引用
收藏
页码:133 / 137
页数:5
相关论文
共 50 条
  • [41] Tensile strength of frozen soil in the temperature range of the frozen fringe
    Akagawa, Satoshi
    Nishisato, Kohei
    COLD REGIONS SCIENCE AND TECHNOLOGY, 2009, 57 (01) : 13 - 22
  • [42] Strength properties of lime stabilized and fibre reinforced residual soil
    Okonta, Felix N.
    Nxumalo, Sinenkosi P.
    GEOMECHANICS AND ENGINEERING, 2022, 28 (01) : 35 - 48
  • [43] Flexible composites, strength, deformation, and fracture processes. 1. Reinforcement structures and tensile strength
    Carl-Håkan Andersson
    Torbjörn Dartman
    Peter Gredinger
    Jan Asplund
    Håkan Strandqvist
    Mechanics of Composite Materials, 1998, 34 : 525 - 536
  • [44] Experimental study on tensile strength of unsaturated fine sands
    Guoqing Cai
    Peixin Shi
    Xiaoang Kong
    Chenggang Zhao
    William J. Likos
    Acta Geotechnica, 2020, 15 : 1057 - 1065
  • [45] Tensile test method effect on the tensile strength of flexible PET geogrids
    Hsieh, CW
    Lin, CK
    GEOTECHNICAL TESTING JOURNAL, 2004, 27 (01): : 111 - 118
  • [46] Experimental investigation on tensile strength of unsaturated fine sands
    Cai G.
    Che R.
    Kong X.
    Liu C.
    Zhao C.
    Shuili Xuebao/Journal of Hydraulic Engineering, 2017, 48 (05): : 623 - 630
  • [47] Experimental study on tensile strength of unsaturated fine sands
    Cai, Guoqing
    Shi, Peixin
    Kong, Xiaoang
    Zhao, Chenggang
    Likos, William J.
    ACTA GEOTECHNICA, 2020, 15 (05) : 1057 - 1065
  • [48] The strength of glass fibre reinforcement after exposure to elevated composite processing temperatures
    Thomason, J. L.
    Kao, C. C.
    Ure, J.
    Yang, L.
    JOURNAL OF MATERIALS SCIENCE, 2014, 49 (01) : 153 - 162
  • [49] Analysis of the influence of meshes used as reinforcement for mortar coating of facades on the tensile strength
    Schimelfenig, Beatriz
    Padilha, Francine
    Bordin, Jonas Demoliner
    da Silva, Cristina Vitorino
    MATERIA-RIO DE JANEIRO, 2018, 23 (03):
  • [50] Supports effect on tensile strength of the stereolithography parts
    Kazemi, M.
    Rahimi, A. R.
    RAPID PROTOTYPING JOURNAL, 2015, 21 (01) : 79 - 88