SIMULATION OF HEAT AND MOISTURE TRANSFER IN WOOD DURING DRYING UNDER CONSTANT AMBIENT CONDITIONS

被引：8
|
作者：
LIU, J [1 ]
AVRAMIDIS, S [1 ]
ELLIS, S [1 ]
机构：
[1] UNIV BRITISH COLUMBIA,DEPT WOOD SCI,389-2357 MAIN MALL,VANCOUVER V6T 1Z4,BC,CANADA
来源：
HOLZFORSCHUNG | 1994年 / 48卷 / 03期
关键词：
WOOD; DRYING; MODELING; MOISTURE PROFILES; TEMPERATURE PROFILES;
D O I：
10.1515/hfsg.1994.48.3.236
中图分类号：
S7 [林业];
学科分类号：
0829 ; 0907 ;
摘要：
A mathematical model that simulates heat and moisture transfer in wood during drying was developed. In this model, the moisture flux was separated into that of the liquid and that of the vapour phase. The moisture content and vapour concentration gradients were taken as the driving forces for the liquid and vapour fluxes, respectively. The simulation results were compared to experimentally measured average moisture content and temperature inside a green piece of wood undergoing desorption in a constant temperature and humidity environment. The simulated profiles of moisture content and temperature at different stages of desorption are also presented.
引用
收藏
页码：236 / 240
页数：5
相关论文
共 50 条
  • [1] Simulation of moisture transfer during wood vacuum drying
    He, Zhengbin
    Qian, Jing
    Qu, Lijie
    Wang, Zhenyu
    Yi, Songlin
    RESULTS IN PHYSICS, 2019, 12 : 1299 - 1303
  • [2] Heat and mass transfer in the drying of wood
    Souza, MED
    Nebra, SA
    DRYING '96, VOL A, 1996, : 695 - 702
  • [3] Development of Computation Methods for Moisture Transfer in Wood Drying
    Balantsev, G. A.
    Balantseva, N. B.
    LESNOY ZHURNAL-FORESTRY JOURNAL, 2009, (05) : 87 - +
  • [4] MODELING OF HEAT AND MOISTURE TRANSFER IN WOOD IN FINISH DRYING BY THE ENERGY OF A MICROWAVE FIELD
    Grinchik, N. N.
    Adamovich, A. L.
    Kizina, O. A.
    Kharma, U. M.
    JOURNAL OF ENGINEERING PHYSICS AND THERMOPHYSICS, 2015, 88 (01) : 35 - 41
  • [5] Heat and mass transfer in fry drying of wood
    Grenier, D.
    Bohuon, P.
    Meot, J. -M.
    Lecomte, D.
    Bailleres, H.
    DRYING TECHNOLOGY, 2007, 25 (1-3) : 511 - 518
  • [6] Simulation of heat and mass transfer of cocoa beans under stepwise drying conditions in a heat pump dryer
    Hii, C. L.
    Law, C. L.
    Law, M. C.
    APPLIED THERMAL ENGINEERING, 2013, 54 (01) : 264 - 271
  • [7] Numerical Modeling of Heat and Moisture Transfer During Microwave Drying of Wood Above FSP (Part I: the Model)
    Yu, Jianfang
    Wang, Ximing
    Hao, Yinan
    PHYSICAL AND NUMERICAL SIMULATION OF MATERIAL PROCESSING VI, PTS 1 AND 2, 2012, 704-705 : 523 - 528
  • [8] Moisture loss from wood products during drying - Part I: Moisture diffusivities and moisture transfer coefficients
    Dincer, I
    ENERGY SOURCES, 1998, 20 (01): : 67 - 75
  • [9] Simulation and validation of heat transfer during wood heat treatment process
    Zhang, Jiali
    Qu, Lijie
    Wang, Zhenyu
    Zhao, Zijian
    He, Zhengbin
    Yi, Songlin
    RESULTS IN PHYSICS, 2017, 7 : 3806 - 3812
  • [10] CHANGE IN THE WOOD MOISTURE DEPENDENCY ON TIME AND DRYING CONDITIONS FOR HEATING BY WOOD COMBUSTION
    Horak, Jiri
    Kubonova, Lenka
    Tomsejova, Sarka
    Laciok, Vendula
    Krpec, Kamil
    Hopan, Frantisek
    Kubesa, Petr
    Kysucan, Zdenek
    Ochodek, Tadeas
    WOOD RESEARCH, 2018, 63 (02) : 261 - 272
12345