DENSIFICATION OF GAMMA-TIAL POWDER BY HOT ISOSTATIC PRESSING

被引：0

作者：

BEDDOES, JC ^{[1
]}

WALLACE, W ^{[1
]}

DEMALHERBE, MC ^{[1
]}

机构：

[1] NATL RES COUNCIL CANADA,INST AEROSP RES,STRUCT & MAT LAB,OTTAWA K1A 0R6,ONTARIO,CANADA

来源：

INTERNATIONAL JOURNAL OF POWDER METALLURGY | 1992年 / 28卷 / 03期

关键词：

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The microstructural characteristics of Ti-54a/oAl and Ti-48a/oAl-2a/oW were investigated by optical and scanning electron microscopy in order to elucidate the microstructural evolution occurring during powder manufacture. Both powder compositions were consolidated by HIPing in the temperature range 1025 to 1250-degrees-C and the consolidated microstructures and hardness evaluated. The results show that a HIP temperature > 1100-degrees-C is necessary to eliminate all porosity. The HIPed compacts exhibit a non-uniform grain size which is associated with a varying volume fraction of dendrite regions in the powder. The hardness of the binary alloy is less than that of the ternary alloy. The hardness of both alloys decreases with increasing HIPing temperature.

引用

页码：313 / 325

页数：13

共 26 条

[1]

BEDDOES J, 1991, IARCR12 NAT RES COUN

[2]

FROES FH, 1989, P M AEROSPACE DEFENS, V1, P23

[3]

FROES FH, IN PRESS J MAT SCI

[4]

Gasbarre T. G., 1989, ADV POWDER METALL, V3, P359

[5] MICROSTRUCTURAL DEVELOPMENT IN RAPIDLY SOLIDIFIED TIAL [J].

GRAVES, JA ;

PEREPEZKO, JH ;

WARD, CH ;

FROES, FH .

SCRIPTA METALLURGICA, 1987, 21 (04) :567-572

[6]

HUANG SC, 1990, Patent No. 4923534

[7]

KIM YW, 1990, INT C POWDER METALLU, V3, P272

[8] CREEP DEFORMATION OF TIAL AND TIAL+W ALLOYS [J].

MARTIN, PL ;

MENDIRATTA, MG ;

LIPSITT, HA .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1983, 14 (10) :2170-2174

[9]

MARTIN PL, 1980, 4TH P C TIT, V2, P1245

[10]

MARTIN PL, 1991, ASM AEROMAT 91

← 1 2 3 →