MELT RHEOLOGY AND STRAIN-INDUCED CRYSTALLIZATION OF POLYPROPYLENE AND ITS HIGH-DENSITY POLYETHYLENE BLENDS

被引:0
|
作者
CHUU, MS
TSAI, BC
机构
来源
ACS SYMPOSIUM SERIES | 1991年 / 462卷
关键词
D O I
暂无
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Melt elasticity and strain-induced crystallization (SIC) conducted under oscillatory shear for two different polypropylene resins: i.e. control-rheology PP and its virgin PP, having similar melt flow rates and polypropylene-high density polyethylene blends were investigated. It was found that the melt elasticity of the virgin PP was only slightly greater than that of the control-rheology PP at the low frequency side, but the induced crystallization rate of the virgin PP was much faster than that of the control-rheology PP. The high molecular weight tails of PP were concluded to play a critical role in determining the SIC rates. The rate was also dependent on the percent of strain imposed within the range of 1 and 10% studied. It increased with increasing strain. The addition of high-density polyethylene increased the melt elasticity of PP, and also slightly increased the quiescent crystallization temperature of PP. However, the SIC rate decreased with increasing HDPE content in the PP/HDPE blends.
引用
收藏
页码:312 / 321
页数:10
相关论文
共 50 条
  • [41] In Situ Compatibilization of Isotactic Polypropylene and High-Density Polyethylene by a Melt Cobranching Reaction
    Wang, Jun
    Yang, Le
    Li, Xiaolong
    Luo, Zhu
    Li, Jianjun
    Xia, Xiaosong
    Linghu, Changkai
    JOURNAL OF POLYMERS AND THE ENVIRONMENT, 2022, 30 (03) : 1127 - 1140
  • [42] In Situ Compatibilization of Isotactic Polypropylene and High-Density Polyethylene by a Melt Cobranching Reaction
    Jun Wang
    Le Yang
    Xiaolong Li
    Zhu Luo
    Jianjun Li
    Xiaosong Xia
    Changkai Linghu
    Journal of Polymers and the Environment, 2022, 30 : 1127 - 1140
  • [43] LOW-TEMPERATURE AUTOOXIDATION OF ISOTACTIC POLYPROPYLENE HIGH-DENSITY POLYETHYLENE BLENDS
    SHIBRYAEVA, LS
    POPOV, AA
    VYSOKOMOLEKULYARNYE SOEDINENIYA SERIYA A & SERIYA B, 1994, 36 (08): : 1362 - 1371
  • [44] Effects of postextrusion conditions on the morphology of foamed high-density polyethylene/polypropylene blends
    Sahagun, C. Zepeda
    Nunez, R. Gonzalez
    Rodrigue, D.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2007, 106 (02) : 1215 - 1227
  • [45] Processing and characterization of microcellular foamed high-density polyethylene/isotactic polypropylene blends
    Doroudiani, S
    Park, CB
    Kortschot, MT
    POLYMER ENGINEERING AND SCIENCE, 1998, 38 (07): : 1205 - 1215
  • [46] POLYBLENDS OF HIGH-DENSITY POLYETHYLENE WITH POLYPROPYLENE
    DEANIN, RD
    DISIDORO, GE
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1980, 180 (AUG): : 4 - ORPL
  • [47] CARBOXYLATION OF HIGH-DENSITY POLYETHYLENE IN THE MELT
    GAYLORD, NG
    MEHTA, R
    KUMAR, V
    TAZI, M
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1988, 195 : 12 - MACR
  • [48] EPITAXIAL CRYSTALLIZATION OF HIGH-DENSITY POLYETHYLENE ON POLYPROPYLENE IN SOLUTION-CAST FILMS
    SHEN, Y
    YANG, DC
    FENG, ZL
    JOURNAL OF MATERIALS SCIENCE, 1991, 26 (07) : 1941 - 1946
  • [49] Study of crystallization behaviour of electron beam irradiated polypropylene and high-density polyethylene
    Svoboda, Petr
    Trivedi, Krunal
    Stoklasa, Karel
    Svobodova, Dagmar
    Ougizawa, Toshiaki
    ROYAL SOCIETY OPEN SCIENCE, 2021, 8 (03):
  • [50] Conformational change of high-density polyethylene during the crystallization from the melt.
    Xiao, Y
    Zhu, XY
    Yan, LY
    Yan, DY
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2003, 225 : U555 - U555