Fabrication of SiC Fiber-SiC Matrix Composites by Reaction Sintering

被引:0
作者
Lim, Kwang-Young [1 ]
Kim, Young-Wook [1 ]
Park, Ji Yeon [2 ]
机构
[1] Univ Seoul, Dept Mat Sci & Engn, Seoul 130743, South Korea
[2] Korea Atom Energy Res Inst, Div Nucl Mat Technol Dev, Daejon 305353, South Korea
关键词
Fiber composites; Silicon carbide; Reaction sintering; Strength;
D O I
暂无
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
This paper presents a new process for producing SiC fiber-SiC matrix (SiC/SiC) composites by reaction sintering. The processing strategy for the fabrication of the SiC/SiC composites involves the following: (1) infiltration of the SiC fiber fabric using a slurry consisting of Si and C precursors, (2) stacking the slurry-infiltrated SiC fiber fabric at room temperature, (3) cross-linking the stacked composites, (4) pyrolysis of the stacked composites, and (5) hot-pressing of the pyrolyzed composites. It was possible to obtain dense SiC/SiC composites with relative densities of >96% and a typical flexural strength of similar to 400 MPa.
引用
收藏
页码:204 / 207
页数:4
相关论文
共 50 条
[21]   Effect of microwave sintering time on the flexural properties of the SiC/SiC composites [J].
Yang, Huiyong ;
Zhou, Xingui ;
Yu, Jinshan ;
Wang, Honglei ;
Huang, Zelan .
CERAMICS INTERNATIONAL, 2015, 41 (10) :14692-14697
[22]   Microwave and conventional sintering of the SiC/SiC composites: The densification and pore distributions [J].
Yang, Huiyong ;
Zhou, Xingui ;
Yu, Jinshan ;
Wang, Honglei ;
Huang, Zelan .
JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 662 :252-258
[23]   Effect of fabrication atmosphere on dielectric properties of SiC/SiC composites [J].
Yu, Xin-Min ;
Zhou, Wan-Cheng ;
Luo, Fa ;
Zheng, Wen-Jing ;
Zhu, Dong-Mei .
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 479 (1-2) :L1-L3
[24]   Effect of BN interfacial layer on the mechanical behavior of SiC fiber reinforced SiC ceramic matrix composites [J].
Chen, Mingwei ;
Qiu, Haipeng ;
Zhao, Yuliang ;
Zhang, Bingyu ;
Liu, Shanhua ;
Luo, Wendong ;
Ma, Xin ;
Xie, Weijie ;
Chen, Yi ;
Zhang, Qiyue .
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2024, 21 (03) :1892-1904
[25]   Microstructure and Microhardness of Mg/SiC Metal Matrix Composites Developed by Microwave Sintering [J].
Gupta S. ;
Sharma A.K. .
Journal of The Institution of Engineers (India): Series C, 2022, 103 (01) :63-68
[26]   The influence of interface reaction zone on interfacial fracture toughness of SiC fiber reinforced titanium matrix composites [J].
Sun, Q. ;
Yang, Y. Q. ;
Huang, B. ;
Luo, X. ;
Xue, C. L. .
COMPOSITE INTERFACES, 2018, 25 (10) :929-947
[27]   Research Progresses of Fatigue of SiC Fiber Reinforced Titanium Matrix Composites [J].
Feng Guanghai ;
Yang Yanqing ;
Luo Xian ;
Lou Juhong ;
Li Maohua ;
Xie Lixiong .
RARE METAL MATERIALS AND ENGINEERING, 2013, 42 (01) :215-220
[28]   Effect of fiber properties on neutron irradiated SiC/SiC composites [J].
Hinoki, T ;
Katoh, Y ;
Kohyama, A .
MATERIALS TRANSACTIONS, 2002, 43 (04) :617-621
[29]   Fabrication and characterization of SiC/MoSi2 composites [J].
Pan, J ;
Surappa, MK ;
Saravanan, RA ;
Liu, BW ;
Yang, DM .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 244 (02) :191-198
[30]   Processing and Testing of RE2Si2O7 Fiber-Matrix Interphases for SiC-SiC Composites [J].
Boakye, Emmanuel E. ;
Mogilevsky, Pavel ;
Parthasarathy, Triplicane A. ;
Keller, Kristin A. ;
Hay, Randall S. ;
Cinibulk, Michael K. .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2016, 99 (02) :415-423