APPLICATION OF GRAIN-BOUNDARY ENGINEERING CONCEPTS TO ALLEVIATE INTERGRANULAR CRACKING IN ALLOYS-600 AND ALLOYS-690

被引：117

作者：

CHEUNG, C ^{[1
]}

ERB, U ^{[1
]}

PALUMBO, G ^{[1
]}

机构：

[1] ONTARIO HYDRO, DIV RES, TORONTO M8Z 5S4, ONTARIO, CANADA

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1994年 / 185卷 / 1-2期

关键词：

D O I：

10.1016/0921-5093(94)90925-3

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Nickel-based alloys used in nuclear steam generator tubing have been found to be susceptible to intergranular stress corrosion cracking while in service. Following a recently developed model, grain boundary engineering concepts may be used to alleviate these concerns. This paper presents a report on the grain refinement approach in the proposed model which results in a higher probability of arresting stress corrosion cracks before reaching a critical length at which failure occurs. For this purpose, an electroplating system was developed to produce ternary Ni-Cr-Fe alloy coatings. Electroplating conditions are given for the production of Alloys 600 ana 690 having an average grain size in the range 100-250 nm.

引用

页码：39 / 43

页数：5

共 34 条

[21] GRAIN-BOUNDARY SEGREGATION AS RELATED TO STRESS-CORROSION CRACKING OF AL-ZN-MG ALLOYS
PICKENS, JR
CHRISTODOULOU, L
DAVIS, GD
GREEN, JAS
JOURNAL OF METALS, 1982, 34 (08): : 50 - 50
[22] THE EFFECT OF GRAIN-BOUNDARY CHEMISTRY ON INTERGRANULAR STRESS-CORROSION CRACKING OF NI-CR-FE ALLOYS IN 50 PCT NAOH AT 140-PERCENT-C
SUNG, JK
KOCH, J
ANGELIU, T
WAS, GS
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1992, 23 (10): : 2887 - 2904
[23] THE EFFECT OF SOLUTION HEAT-TREATMENT ON GRAIN-BOUNDARY SEGREGATION AND STRESS-CORROSION CRACKING OF AL-ZN-MG ALLOYS
PICKENS, JR
LANGAN, TJ
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1987, 18 (10): : 1735 - 1744
[24] APPLICATION OF THE GRAIN-BOUNDARY ETCHING METHOD TO A LOW-ALLOY CRMO STEEL AND SOME IRON-BASED ALLOYS
OGURA, T
MAKINO, A
MASUMOTO, T
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1981, 45 (11) : 1180 - 1186
[25] ATOMISTIC STUDIES OF GRAIN-BOUNDARY SEGREGATION IN FE-P AND FE-B ALLOYS .2. ELECTRONIC-STRUCTURE AND INTERGRANULAR EMBRITTLEMENT
HASHIMOTO, M
ISHIDA, Y
WAKAYAMA, S
YAMAMOTO, R
DOYAMA, M
FUJIWARA, T
ACTA METALLURGICA, 1984, 32 (01): : 13 - 20
[26] EFFECT OF BORON ON THE GRAIN-BOUNDARY SEGREGATION OF PHOSPHORUS AND INTERGRANULAR FRACTURE IN HIGH-PURITY FE-0.2 PCT P-B ALLOYS
LIU, CM
NAGOYA, T
ABIKO, K
KIMURA, H
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1992, 23 (01): : 263 - 269
[27] Correlations among stress corrosion cracking, grain-boundary microchemistry, and Zn content in high Zn-containing Al-Zn-Mg-Cu alloys
Yuan, Ding-ling
Chen, Song-yi
Chen, Kang-hua
Huang, Lan-ping
Chang, Jiang-yu
Zhou, Liang
Ding, Yun-feng
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2021, 31 (08) : 2220 - 2231
[28] Concerning the chemical and phase heterogeneity and reasons for intergranular embrittlement of molybdenum alloys. I. Influence of structural evolution during annealing on grain-boundary segregation of interstitial elements
Drachinskiy, A.S.
Kaverina, S.N.
Kraynikov, A.V.
Slyunyayev, V.N.
Physics of Metals and Metallography, 1990, 70 (02): : 88 - 93
[29] Isolation of carbon and grain boundary carbide effects on the creep and intergranular stress corrosion cracking behavior of Ni-16Cr-9Fe-xC alloys in 360 °C primary water
Hertzberg, JL
Was, GS
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1998, 29 (3A): : 1035 - 1046
[30] Isolation of carbon and grain boundary carbide effects on the creep and intergranular stress corrosion cracking behavior of Ni-16Cr-9Fe-xC alloys in 360 °C primary water
Hertzberg, J.L.
Was, G.S.
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1998, 29 (13): : 1035 - 1046

← 1 2 3 4 →