ROLE OF MAGNESIUM IN CAST-ALUMINUM ALLOY MATRIX COMPOSITES

Wetting between the dispersoid and the matrix alloy is the foremost requirement during the preparation of metal matrix composites (MMC) especially with the casting/liquid metal processing technique. The basic principles involved in improving wetting fall under three categories: (i) increasing the surface energies of the solids, (ii) decreasing the surface tension of the liquid matrix alloy, and (iii) decreasing the solid/liquid interfacial energy at the dispersoid matrix interface. The presence of magnesium, a powerful surfactant as well as a reactive element, in the aluminium alloy matrix seems to fulfil all the above three requirements. The role played by magnesium during the synthesis of aluminium alloy matrix composites with dispersoids such as zircon (ZrSiO4), zirconia (ZrO2), titania (TiO2), silica (SiO2), graphite, aluminium oxide (Al2O3) and silicon carbide (SiC), has been analysed. The important role played by the magnesium during the composite synthesis is the scavenging of the oxygen from the dispersoid surface, thus thinning the gas layer and improving wetting and reaction-aided wetting with the surface of the dispersoid. The combinations of magnesium and aluminium seem to have some synergistic effect on wetting.